Premium Information is available for this item - Upgrade for $1 a day
5905-01-247-1345
Inductive Wire Wound Fixed Resistor
5905012471345 012471345 MIL-PRF-39007/6 RWR74S24R3FS MILR26-5 RW74U24R3F MIL-R-39007/6
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Exclut s SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE. View more Inductive Wire Wound Fixed Resistor
November 2023
14
Marketplace 5905-01-247-1345
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-247-1345 5+ Documents (More...)
RQST NE Updated Every Day 5905-01-247-1345 RQST Updated Every Day 5905-01-247-1345 RQST NE Related
RQST Updated Every Day 5905-01-247-1345 RQST NE Related Documents 5905-01-247-1345 5+ Documents
MIL-PRF-39007/6 RWR74S24R3FS MILR26-5 RW74U24R3F MIL-R-39007/6 A resistor whose ohmic value cannot be
MIL-R-39007/6 A resistor Wound Fixed Resistor RWR74S24R3FS MILR26-5RW74U24R3F MIL-R-39007 MILR26-5MILR26
RW74UR280F RWP21FR280F RWR74SR280FR MIL-R-39007/6 A resistor A resistor whose ohmic value cannot MILR26
-5 RW74U24R3F MIL-R-39007/6 A resistor MILR26-5 RW74U24R3F RW74U1300D MIL-R-39007/6 A resistor whose
MIL-R-39007/6 A resistor Wound Fixed Resistor RWR74S24R3FS MILR26-5 RW74U24R3F MIL-R-39007 https//www.nsnlookup.com
RWR74S24R3FS MILR26-5 RW74U24R3F MIL-R-39007/6 A resistor whose ohmic value cannot be adjusted MILR26
RW74UR280F RWP21FR280F RWR74SR280FR MIL-R-39007/6 A resistor A resistor whose ohmic value cannot MILR26
-5 RW74U24R3F MIL-R-39007/6 A resistor MILR26-5 RW74U24R3F Inductive Wire Wound Fixed Resistor RWR74S1300DSMILR26
Restrictions 5905-01-247-1345
5905-01-247-1345 is a Inductive Wire Wound Fixed Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5905-01-247-1345
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-247-1345
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- GTKE
- Brazil (YA01)
- Effective Date:
- 1 Jul 2001
- Spain (YB01)
- Effective Date:
- 1 Apr 2008
- Republic of Korea (ZH01)
- Effective Date:
- 1 Dec 2008
- Italy (ZR01)
- Effective Date:
- 1 Dec 2008
- Greece (ZU01)
- Effective Date:
- 1 Dec 2008
Approved Sources 5905-01-247-1345
- Part Number
- Manufacturer
- Status
- RWR74S24R3FS
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-39007/6
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-R-39007/6
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MILR26-5
- 81349 - Military Specifications (Active)
- Transferred
- Transferred
- RW74U24R3F
- 81349 - Military Specifications (Active)
- Transferred
- Transferred
Datasheet 5905-01-247-1345
- Characteristic
- Specifications
- FIIG
- Specifications
- A001A0
- Ambient Temp In Deg Celsius At Full Rated Power [AAQF]
- 25.0
- Ambient Temp In Deg Celsius At Zero Percent Rated Power [AAQG]
- 275.0
- Body Diameter [ABPM]
- 0.281 Inches Minimum And 0.343 Inches Maximum
- Body Length [ADAQ]
- 0.813 Inches Minimum And 0.937 Inches Maximum
- Cubic Measure [CBME]
- 0.067 Cubic Inches
- Electrical Resistance [AAPP]
- 24.300 Ohms
- Inclosure Method [AAQZ]
- Encapsulated
- Power Dissipation Rating In Watts [AEFB]
- 5.000 Free Air
- Reliability Failure Rate Level In Percent [AARH]
- 0.001
- Reliability Indicator [AARG]
- Established
- Resistance Tolerance In Percent [AAPQ]
- -1.000/+1.000
- Unpackaged Unit Weight [PKWT]
- 5.0 Grams
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-39007/6 Government Specification
- Style Designator [STYL]
- Axial Terminal Each End
- Temp Coefficient Of Resistance In Ppm Per Deg Celsius [AAPE]
- -20.0/+20.0
- Temp Range Of Temp Coefficient In Deg Celsius [AAQH]
- -55.0/+275.0
- Terminal Length [ABJT]
- 1.500 Inches Minimum
- Terminal Type [AARB]
- Wire Lead
- Test Data Document [TEST]
- 81349-Mil-R-39007 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5905-01-247-1345
DLA Procurement Analysis 5905-01-247-1345
- Last Stock Position:
- 61 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5905-01-247-1345
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5905-01-247-1345
Freight Information 5905-01-247-1345
5905-01-247-1345 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-247-1345 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-247-1345 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-247-1345 is not classified as a special type of cargo when transported by water. 5905-01-247-1345 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-247-1345
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5905-01-247-1345 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: