Premium Information is available for this item - Upgrade for $1 a day
5905-01-218-5396
Inductive Wire Wound Fixed Resistor
5905012185396 012185396 MIL-PRF-39007/6 RWR74S3440DS MIL-R-39007/6
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Exclut s SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE. View more Inductive Wire Wound Fixed Resistor
May 2023
11
Marketplace 5905-01-218-5396
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-218-5396 5+ Documents (More...)
RWR74S1500FS MIL-R-39007/6 A resistor whose ohmic value cannot be adjusted https//www.nsnlookup.com
/www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-218-5396 Inductive Wire Wound Fixed Resistor RWR74S3440DS
/fsg-59/fsc-5905/us
RWR74S1500FS MIL-R-39007/6 A resistor whose ohmic value cannot be adjusted https//www.nsnlookup.com
/www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-218-5396 Inductive Wire Wound Fixed Resistor RWR74S3440DS
/fsg-59/fsc-5905/us
RWR74S1500FS MIL-R-39007/6 A resistor whose ohmic value cannot be adjusted https//www.nsnlookup.com
/www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-218-5396 Inductive Wire Wound Fixed Resistor RWR74S3440DS
/fsg-59/fsc-5905/us
RWR74S1500FS MIL-R-39007/6 A resistor whose ohmic value cannot be adjusted https//www.nsnlookup.com
/www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-218-5396 Inductive Wire Wound Fixed Resistor RWR74S3440DS
/fsg-59/fsc-5905/us
RWR74S1500FS MIL-R-39007/6 A resistor whose ohmic value cannot be adjusted https//www.nsnlookup.com
/www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-218-5396 Inductive Wire Wound Fixed Resistor RWR74S3440DS
Restrictions 5905-01-218-5396
5905-01-218-5396 is a Inductive Wire Wound Fixed Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5905-01-218-5396
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-218-5396
- Brazil (YA01)
- Effective Date:
- 1 Jul 2001
Approved Sources 5905-01-218-5396
- Part Number
- Manufacturer
- Status
- RWR74S3440DS
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-39007/6
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-R-39007/6
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-01-218-5396
- Characteristic
- Specifications
- FIIG
- Specifications
- A001A0
- Ambient Temp In Deg Celsius At Full Rated Power [AAQF]
- 25.0
- Ambient Temp In Deg Celsius At Zero Percent Rated Power [AAQG]
- 275.0
- Body Diameter [ABPM]
- 0.312 Inches Nominal
- Body Length [ADAQ]
- 0.875 Inches Nominal
- Cubic Measure [CBME]
- 0.085 Cubic Inches
- Electrical Resistance [AAPP]
- 344.000 Ohms
- Inclosure Method [AAQZ]
- Encapsulated
- Power Dissipation Rating In Watts [AEFB]
- 5.000 Free Air
- Resistance Tolerance In Percent [AAPQ]
- -0.500/+0.500
- Reliability Failure Rate Level In Percent [AARH]
- 0.001
- Reliability Indicator [AARG]
- Established
- Unpackaged Unit Weight [PKWT]
- 5.0 Grams
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-39007/6 Government Specification
- Style Designator [STYL]
- Axial Terminal Each End
- Temp Coefficient Of Resistance In Ppm Per Deg Celsius [AAPE]
- -20.0/+20.0
- Temp Range Of Temp Coefficient In Deg Celsius [AAQH]
- -55.0/+275.0
- Terminal Length [ABJT]
- 1.500 Inches Minimum
- Terminal Type [AARB]
- Wire Lead
- Test Data Document [TEST]
- 81349-Mil-R-39007 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
NATO Stock Numbers Related to 5905-01-218-5396
Freight Information 5905-01-218-5396
5905-01-218-5396 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093490. A Sub NMFC of X. It has a NMFC Description of BOLT/NUT/SCREW/CLIPS/FASTENER/ETC. 5905-01-218-5396 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50270 which rates the freight between FCL and LCL. 5905-01-218-5396 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5905-01-218-5396 is not classified as a special type of cargo when transported by water. 5905-01-218-5396 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-218-5396
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box