Premium Information is available for this item - Upgrade for $1 a day
5905-01-176-7152
Precision Nonwire Wound Variable Resistor
5905011767152 011767152 13084177 4211-635
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Precision Nonwire Wound Variable Resistor
May 2023
7
Marketplace 5905-01-176-7152
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-176-7152 1+ Documents (More...)
(Identification) 1/2 NSN 5905-01-176-7152 (Identification) 2/2 - - 1.
United States (US) 4. 5905-01-176-7152 Marketplace Restrictions Approved Sources Datasheet Management
Restrictions 5905-01-176-7152
5905-01-176-7152 is a Precision Nonwire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5905-01-176-7152
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-176-7152
- US Army (A918)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A196
- Supplementary Receivers:
- CT
- Netherlands (ZN01)
- Effective Date:
- 1 May 2000
- Greece (ZU01)
- Effective Date:
- 1 May 2006
Approved Sources 5905-01-176-7152
- Part Number
- Manufacturer
- Status
- 13084177
- Manufacturer
- 04939 - Lockheed Martin Corporation (Active)
- Primary Buy
- Primary Buy
- 4211-635
- 11534 - Bei Sensors & Systems Company, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 13084177
- 58260 - Program Manager Advanced Attack (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-01-176-7152
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 1800.0 Minimum
- Electrical Resistance Per Section [CQCC]
- 2.000 Percent, Rated Amperes C And Better Flooring
- Actuator Type [AEFD]
- Single Shaft
- Actuator Travel Control Feature [CRSX]
- Stops
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 70.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 105.0 Single Section
- Body Diameter [ABPM]
- 0.875 Nominal Inches
- Body Length [ADAQ]
- 1.213 Inches Nominal
- Body Style [AAQL]
- Cylindrical Servo Mounted
- Fixed Tap Quantity Per Section [CRJS]
- 1 Single Section
- Function Characteristic Per Section [CSBX]
- 7 Oclock All Primaries
- Function Conformity Per Section [CRGM]
- Single Section Independent Linearity
- Function Conformity Tolerance Per Section [CQFL]
- -0.50/+0.50 Single Section
- Maximum Running Torque [AEFL]
- 0.40 Inch-Ounces
- Maximum Starting Torque [AEFK]
- 0.40 Inch-Ounces
- Maximum Stop Torque [AEFM]
- 128.00 Inch-Ounces
- Mounting Method [AXGY]
- Clamp Ring
- Mounting Lip Depth [AEDA]
- 0.0620 Nominal Inches
- Mounting Lip Diameter [AECZ]
- 0.8750 Inches Nominal
- Lateral Runout [AEGA]
- 0.003 Inches
- Power Dissipation Rating Per Section In Watts [CRGD]
- 1.5 7Th Secondary Quality
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0/+10.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 1800.0 Minimum
- Section Quantity [AAPN]
- 1
- Shaft Bearing Type [AEDZ]
- Ball
- Shaft End Play [AEFY]
- 0.00500 Inches
- Shaft Diameter [ABWV]
- 0.1248 Inches Maximum
- Shaft Length [ABXF]
- 0.375 Inches Nominal
- Shaft Radial Play [AEGC]
- 0.002 Inches
- Shaft Runout [AEFZ]
- 0.001 Inches
- Shaft Style [AEDX]
- Round
- Overall Diameter [ADAV]
- 1.250 Inches Maximum
- Overall Length [ABHP]
- 1.588 Inches Nominal
- Pilot Diameter [AAVL]
- 0.6250 Inches Maximum
- Pilot Length [AAVM]
- 0.0620 Inches Nominal
- Pilot Diameter Runout [AEGB]
- 0.00150 Inches
- Undercut Diameter [ABPA]
- 0.781 Inches Maximum
- Undercut Width [ABPC]
- 0.0620 Inches Nominal
- Tap Location From Ccw Terminal Per Section In Ohms [CSBW]
- 1000.0 Single Section
- Tap Location Tolerance Per Section [CRKS]
- -20.0/+20.0 Ohms Single Section
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius [CRFJ]
- -70.0/+70.0 Single Section
- Terminal Location [APXH]
- Longitudinally Positioned On The Circumference
- Terminal Type And Quantity [TTQY]
- 4 Turret
- Test Data Document [TEST]
- 58260-13084177 Drawing (This Is The Basic Governing Drawing, Such As A Contractor Drawing, Original Equipment Manufacturer Drawing, Etc.; Excludes Any Specification, Standard Or Other Document That May Be Referenced In A Basic Governing Drawing)
DLA Procurement Analysis 5905-01-176-7152
Management Data 5905-01-176-7152
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 5905-01-176-7152
Freight Information 5905-01-176-7152
5905-01-176-7152 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-176-7152 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-176-7152 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-176-7152 is not classified as a special type of cargo when transported by water. 5905-01-176-7152 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-176-7152
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5905-01-176-7152 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: