Premium Information is available for this item - Upgrade for $1 a day
5905-01-172-3806
Noninductive Wire Wound Fixed Resistor
5905011723806 011723806 MIL-PRF-39007/9 RWR81N75R0FM RWR81N75R0FS MIL-R-39007/9
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flowo s an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXENTEWIRE WOUND, INDUCTIVE. View more Noninductive Wire Wound Fixed Resistor
November 2023
15
Marketplace 5905-01-172-3806
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5905-01-172-3806 5+ Documents (More...)
Account Upgrade 5905-01-172-3806Noninductive Wire Wound Fixed Resistor5905011723806 011723806 MIL-PRF
A resistor whose ohmic value cannot be adjusted or varied RESISTOR MIL-R-39007/9 RESISTOR,FIXED MIL-R
MIL-R-39007/9 RESISTOR,FIXED,WIRE WOUND,INDUCTIVE 15 EA NS Request Quotation Subscribe to View Vendor
A resistor whose ohmic value cannot be adjusted or varied RESISTOR MIL-R-39007/9 RESISTOR,FIXED,WIRE
MIL-R-39007/9 RESISTOR,FIXED,WIRE WOUND,INDUCTIVE 15 EA NS Request Quotation Subscribe to View Vendor
A resistor whose ohmic value cannot be adjusted or varied RESISTOR MIL-R-39007/9 RESISTOR,FIXED,WIRE
MIL-R-39007/9 RESISTOR,FIXED,WIRE WOUND,INDUCTIVE 15 EA NS Request Quotation Subscribe to View Vendor
A resistor whose ohmic value cannot be adjusted or varied RESISTOR MIL-R-39007/9 RESISTOR,FIXED,WIRE
MIL-R-39007/9 RESISTOR,FIXED,WIRE WOUND,INDUCTIVE 15 EA NS Request Quotation Subscribe to View Vendor
A resistor whose ohmic value cannot be adjusted or varied RESISTOR MIL-R-39007/9 RESISTOR,FIXED,WIRE
Restrictions 5905-01-172-3806
5905-01-172-3806 is a Noninductive Wire Wound Fixed Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-01-172-3806
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-172-3806
- US Air Force (FXGX)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- GTHXHD
- Spain (YB01)
- Effective Date:
- 1 Jun 2003
Approved Sources 5905-01-172-3806
- Part Number
- Manufacturer
- Status
- RWR81N75R0FS
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-39007/9
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-R-39007/9
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- RWR81N75R0FM
- 81349 - Military Specifications (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5905-01-172-3806
- Characteristic
- Specifications
- FIIG
- Specifications
- A001A0
- Electrical Resistance [AAPP]
- 75.000 Ohms
- Ambient Temp In Deg Celsius At Full Rated Power [AAQF]
- 25.0
- Ambient Temp In Deg Celsius At Zero Percent Rated Power [AAQG]
- 275.0
- Body Diameter [ABPM]
- 0.085 Inches Nominal
- Body Length [ADAQ]
- 0.250 Inches Nominal
- Cubic Measure [CBME]
- 0.002 Cubic Inches
- Inclosure Method [AAQZ]
- Encapsulated
- Power Dissipation Rating In Watts [AEFB]
- 1.000 Free Air
- Reliability Failure Rate Level In Percent [AARH]
- 0.001
- Reliability Indicator [AARG]
- Established
- Resistance Tolerance In Percent [AAPQ]
- -1.000/+1.000
- Unpackaged Unit Weight [PKWT]
- 0.350 Grams
- Specification/Standard Data [ZZZK]
- 81349-Mil-Prf-39007/9 Government Specification
- Style Designator [STYL]
- Axial Terminal Each End
- Temp Coefficient Of Resistance In Ppm Per Deg Celsius [AAPE]
- -20.0/+20.0
- Temp Range Of Temp Coefficient In Deg Celsius [AAQH]
- -55.0/+275.0
- Terminal Length [ABJT]
- 1.500 Inches Minimum
- Terminal Type [AARB]
- Wire Lead
- Test Data Document [TEST]
- 81349-Mil-Prf-39007/9 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5905-01-172-3806
DLA Procurement Analysis 5905-01-172-3806
- Last Stock Position:
- 819 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5905-01-172-3806
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5905-01-172-3806
Freight Information 5905-01-172-3806
5905-01-172-3806 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-172-3806 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-172-3806 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-172-3806 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-01-172-3806 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-172-3806
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5905-01-172-3806 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: