Premium Information is available for this item - Upgrade for $1 a day
5905-01-164-1282
Nonprecision Nonwire Wound Variable Resistor
5905011641282 011641282 MIL-PRF-94/6 2RV7NYSB504504A JD1G040S504UA JD1N032S504UA MILR94-6
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Nonwire Wound Variable Resistor
June 2023
14
Marketplace 5905-01-164-1282
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-164-1282 5+ Documents (More...)
NSN 5905-01-164-1282 (Identification) fsc 011994161,MIL-PRF-94/6 2RV7NYSJ205205A MILR94-6 which MILR94
MIL-PRF-94/6 A ,MIL-PRF-94/6 2RV7NYSJ205205A MILR94-6 A JD1N056P103UA https//www.nsnlookup.com /fsg-
More... ) https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00-932-27165905009322716009322716,JD1N032S504UA
Every Day 5905-00-932-2716 RQST Updated Every Day 5905-00-932-2716 RQST NE Related Documents ,JD1N032S504UA
More... ) https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00-465-44955905004654495004654495,JD1G040S504UA
vendors Request Updated Every Day 5905-00-465-4495 https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-164-1282
5905011641282 011641282,MIL-PRF-94/6 (Identification) 1/2 NSN 5905-01-164-1282 (Identification)
United States (US) 4. 5905-01-164-1282 Marketplace Restrictions Approved Sources Datasheet Management
-255-5674 5905012555674 012555674,MIL-PRF-94/6 ,MIL-PRF-94/6 2RV7NYSJ205205A MILR94-6 which MILR94-6
MILR94-6 which MILR94-6 A fsc 011994161,MIL-PRF -94/6 2RV7NYSJ205205A MILR94-6 which MILR94-6 A resistor
Restrictions 5905-01-164-1282
5905-01-164-1282 is a Nonprecision Nonwire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-01-164-1282
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-164-1282
- US Army (A918)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A196
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- NIND
- Supplementary Collaborators:
- HD
- Brazil (YA01)
- Effective Date:
- 1 Dec 2001
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 5905-01-164-1282
- Part Number
- Manufacturer
- Status
- 2RV7NYSB504504A
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-94/6
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MILR94-6
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- JD1G040S504UA
- 01121 - Rockwell Automation, Inc. (Active)
- Transferred
- Transferred
- JD1N032S504UA
- 01121 - Rockwell Automation, Inc. (Active)
- Transferred
- Transferred
Datasheet 5905-01-164-1282
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Electrical Resistance Per Section [CQCC]
- 500.000 Kilohms All Sections
- Actuator Type [AEFD]
- Single Shaft
- Actuator Travel Control Feature [CRSX]
- Stops
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 70.0 All Sections
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 120.0 All Sections
- Body Diameter [ABPM]
- 1.094 Inches Nominal
- Body Length [ADAQ]
- 1.266 Inches Maximum
- Body Style [AAQL]
- Cylindrical Bushing Mounted
- Mounting Bushing Length [ADAP]
- 0.375 Inches Nominal
- Mounting Method [AXGY]
- Standard Bushing
- Nonturn Device Location [AEFN]
- At 9 Oclock
- Nonturn Device Radius [AEFP]
- 0.531 Inches Nominal
- Power Dissipation Rating Per Section In Watts [CRGD]
- 2.0 Free Air All Sections
- Resistance Temp Characteristic Range Per Section In Percent [CQDB]
- -3.0 To 0.0 -55 Deg Celsius All Sections And -5.0 To 10.0 -25 Deg Celsius All Sections And -5.0 To 10.0 25 Deg Celsius All Sections And +0.0 To 3.0 120 Deg Celsius All Sections
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0 To 10.0 All Sections
- Rotary Actuator Travel In Angular Deg [CQCK]
- 309.0 Minimum And 320.0 Maximum
- Screw Thread Quantity Per Inch [AJYQ]
- 32.0
- Screw Thread Series Designator [AJYP]
- Unef
- Screw Thread Diameter [AJYN]
- 0.375 Inches Nominal
- Section Quantity [AAPN]
- 2
- Shaft Diameter [ABWV]
- 0.248 Inches Minimum And 0.251 Inches Maximum
- Shaft Length [ABXF]
- 0.500 Inches Nominal
- Shaft Style [AEDX]
- Round, Slotted
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-94/6 Government Specification
- Terminal Location [APXH]
- Radially Positioned Over Less Than Half The Circumference
- Terminal Type And Quantity [TTQY]
- 6 Tab, Solder Lug
- Test Data Document [TEST]
- 81349-Mil-R-94 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5905-01-164-1282
Management Data 5905-01-164-1282
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5905-01-164-1282
Freight Information 5905-01-164-1282
5905-01-164-1282 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-164-1282 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-164-1282 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-164-1282 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-01-164-1282 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-164-1282
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- --
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5905-01-164-1282 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: