Premium Information is available for this item - Upgrade for $1 a day
5905-01-158-2346
Nonprecision Nonwire Wound Variable Resistor
5905011582346 011582346 12310241 700-0049
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Nonwire Wound Variable Resistor
May 2023
8
Marketplace 5905-01-158-2346
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-158-2346 5+ Documents (More...)
United States (US) 4. 3460-01-700-0049 Marketplace Restrictions Approved Sources Datasheet Management
BUY NE FedMall Updated Every Day 3460-01-700-0049 RQST NE Updated Every Day 3460-01-700-0049 RQST Updated
-14-429-0738 3460-33-203-4150 -306-5984 Pedestal 3460410002406 700-0006 3460-22-616-0587 3460-01-700-0049
-14-429-0738 -203-4150 Grinding Machine Pedestal 3460131096129 700-0006 3460-22-616-0587 3460-01-700-0049
Request a Quotation from participating marketplace vendors Request Updated Every Day 2840-00-700-0049
RQST Updated Every Day 2840-00-700-0049 RQST NE Related Documents 2840-00-700-0049 1+ Documents ( More
-14-429-0738 3460-33-203-4150 -306-5984 Pedestal 3460131096129 700-0006 3460-22-616-0587 3460-01-700-0049
-14-429-0738 3460-33-203-4150 -306-5984 Pedestal 3460410002406 700-0006 3460-22-616-0587 3460-01-700-0049
Restrictions 5905-01-158-2346
5905-01-158-2346 is a Nonprecision Nonwire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5905-01-158-2346
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-158-2346
- US Army (A918)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A196
- Supplementary Receivers:
- AZ
Approved Sources 5905-01-158-2346
- Part Number
- Manufacturer
- Status
- 12310241
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Source Control
- Source Control
- 700-0049
- 07661 - Systems And Electronics Inc (Obsolete)
- Original Design
- Original Design
- 12310241
- 35627 - Precision Electronics Corporation (Active)
- Secondary Buy
- Secondary Buy
- 12310241
- 12697 - Clarostat Sensors And Controls (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-01-158-2346
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 292.0 Minimum And 298.0 Maximum
- Electrical Resistance Per Section [CQCC]
- 20.000 Kilohms Single Section
- Actuator Type [AEFD]
- Single Shaft
- Actuator Travel Control Feature [CRSX]
- Stops
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 70.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 120.0 Single Section
- Body Diameter [ABPM]
- 0.500 Inches Nominal
- Body Length [ADAQ]
- 0.570 Inches Maximum
- Body Style [AAQL]
- Cylindrical Bushing Mounted
- Maximum Running Torque [AEFL]
- 6.00 Inch-Ounces
- Maximum Starting Torque [AEFK]
- 6.00 Inch-Ounces
- Maximum Stop Torque [AEFM]
- 48.00 Inch-Ounces
- Mounting Bushing Length [ADAP]
- 0.380 Inches Nominal
- Mounting Method [AXGY]
- Standard Bushing
- Nonturn Device Location [AEFN]
- At 9 Oclock
- Nonturn Device Radius [AEFP]
- 0.245 Inches Nominal
- Power Dissipation Rating Per Section In Watts [CRGD]
- 0.25 Free Air Single Section
- Resistance Temp Characteristic Range Per Section In Percent [CQDB]
- -3.0 To 3.0 -55 Deg Celsius Single Section And -5.0 To 10.0 -25 Deg Celsius Single Section And -5.0 To 10.0 25 Deg Celsius Single Section And +0.0 To 3.0 120 Deg Celsius Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0 To 10.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 292.0 Minimum And 298.0 Maximum
- Screw Thread Quantity Per Inch [AJYQ]
- 32.0
- Screw Thread Series Designator [AJYP]
- Unf
- Screw Thread Diameter [AJYN]
- 0.250 Inches Nominal
- Section Quantity [AAPN]
- 1
- Shaft Bearing Type [AEDZ]
- Bearing
- Shaft Diameter [ABWV]
- 0.124 Inches Minimum And 0.126 Inches Maximum
- Shaft Length [ABXF]
- 0.940 Inches Nominal
- Shaft Style [AEDX]
- Round, Threaded
- Terminal Location [APXH]
- Rear End
- Terminal Type And Quantity [TTQY]
- 3 Tab, Solder Lug
- Test Data Document [TEST]
- 19207-12310241 Drawing (This Is The Basic Governing Drawing, Such As A Contractor Drawing, Original Equipment Manufacturer Drawing, Etc.; Excludes Any Specification, Standard Or Other Document That May Be Referenced In A Basic Governing Drawing)
- Thread Length [AASA]
- 0.250 Inches Nominal
Weapon Systems (WSDC) 5905-01-158-2346
DLA Procurement Analysis 5905-01-158-2346
Management Data 5905-01-158-2346
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 5905-01-158-2346
Freight Information 5905-01-158-2346
5905-01-158-2346 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-158-2346 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-158-2346 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-158-2346 is not classified as a special type of cargo when transported by water. 5905-01-158-2346 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-158-2346
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5905-01-158-2346 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: