Premium Information is available for this item - Upgrade for $1 a day
5905-01-085-6403
Nonprecision Nonwire Wound Variable Resistor
5905010856403 010856403 MIL-PRF-23285/3 RVC6SYL502B MIL-R-23285/3
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Nonwire Wound Variable Resistor
May 2023
5
Marketplace 5905-01-085-6403
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-085-6403 5+ Documents (More...)
5905010990924010990924,MIL-PRF-23285/3 5905-00-194-7859 5905001947859 001947859,MIL-R-23285/3 , ,MIL-PRF
5905-00 5905010856403010856403,MIL-PRF-23285/3 5905-00-194-7859 5905001947859 001947859,MIL-R-23285/
5905001947859 001947859,MIL-R-23285/3 5905001947859001947859 ,MIL-R-23285/3 Account 5905-00-194-7859
001947859,MIL-R-23285/3 5905001947859001947859,MIL-R-23285/3 https/ https//www.nsnlookup.com /fsg-59
Account https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-085-6403 5905010856403 010856403,MIL-PRF
-23285/3 -7859 5905001947859 001947859,MIL-R-23285/3 , ,MIL-PRF-23285/3 5905-00-194-7859 5905001947859
5905010856403 010856403,MIL-PRF-23285/3 5905-00-194-7859 5905001947859 001947859,MIL-R-23285/3 5905001947859001947859
MIL-R-23285/3 Account /us 5905-01-012-5505 5905010125505 010125505,MIL-PRF-23285/3 RVC6NYL104B MIL-R
5905001947859001947859 MIL-R-23285/3 Account /us 5905-01-012-5505 5905010125505 010125505,MIL-PRF-23285
-194-7859 5905001947859 001947859,MIL-R-23285 /3 5905001947859001947859,MIL-R-23285/3 Account
Restrictions 5905-01-085-6403
5905-01-085-6403 is a Nonprecision Nonwire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-01-085-6403
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-085-6403
- US Army (A918)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A196
- Supplementary Receivers:
- CL
Approved Sources 5905-01-085-6403
- Part Number
- Manufacturer
- Status
- RVC6SYL502B
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-23285/3
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-R-23285/3
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-01-085-6403
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 292.0 Minimum And 298.0 Maximum
- Electrical Resistance Per Section [CQCC]
- 5.000 Kilohms Single Section
- Actuator Type [AEFD]
- Single Shaft
- Actuator Travel Control Feature [CRSX]
- Stops
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 125.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 175.0 Single Section
- Body Diameter [ABPM]
- 0.500 Inches Nominal
- Body Length [ADAQ]
- 0.531 Inches Nominal
- Body Style [AAQL]
- Cylindrical Bushing Mounted
- Features Provided [CBBL]
- Shaft Seal
- Maximum Running Torque [AEFL]
- 6.00 Inch-Ounces
- Maximum Starting Torque [AEFK]
- 6.00 Inch-Ounces
- Maximum Stop Torque [AEFM]
- 48.00 Inch-Ounces
- Mounting Bushing Length [ADAP]
- 0.250 Inches Nominal
- Mounting Method [AXGY]
- Standard Bushing
- Nonturn Device Location [AEFN]
- At 4'30 Oclock And At 10'30 Oclock
- Nonturn Device Radius [AEFP]
- 0.245 Inches Nominal
- Power Dissipation Rating Per Section In Watts [CRGD]
- 0.5 Free Air Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0 To 10.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 292.0 Minimum And 298.0 Maximum
- Screw Thread Quantity Per Inch [AJYQ]
- 32.0
- Screw Thread Series Designator [AJYP]
- Unef
- Screw Thread Diameter [AJYN]
- 0.250 Inches Nominal
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.125 Inches Nominal
- Shaft Length [ABXF]
- 0.375 Inches Nominal
- Shaft Style [AEDX]
- Round
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-23285/3 Government Specification
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius [CRFJ]
- -250.0 To 250.0 Single Section
- Terminal Location [APXH]
- Rear End
- Terminal Type And Quantity [TTQY]
- 3 Tab, Solder Lug
- Test Data Document [TEST]
- 81349-Mil-R-23285 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5905-01-085-6403
Management Data 5905-01-085-6403
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 5905-01-085-6403
Freight Information 5905-01-085-6403
5905-01-085-6403 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-085-6403 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-085-6403 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-085-6403 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-01-085-6403 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-085-6403
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5905-01-085-6403 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: