Premium Information is available for this item - Upgrade for $1 a day
5905-01-052-0988
Film Fixed Resistor
5905010520988 010520988 MILR55182 RNC65H1232DS
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors. View more Film Fixed Resistor
November 2023
6
Marketplace 5905-01-052-0988
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-052-0988 5+ Documents (More...)
MILR55182 Request RNC70J4533BS MILR55182 Request RNC70J4533BS MILR55182 MILR55182 Request RNC70J4533BS
RNC70J4533BS MILR55182 Request MILR55182 Request RNC70J4533BS MILR55182 Request RNC70J4533BS MILR55182
RNC70J4533BS MILR55182 Request MILR55182 Request RNC70J4533BS MILR55182 Request RNC70J4533BS MILR55182
MILR55182 Request RNC70J4533BS MILR55182 Request RNC70J4533BS MILR55182 https//www.nsnlookup.com /fsg
/fsg Request RNC70J4533BS MILR55182 /fsg Request RNC70J4533BS MILR55182 RNC70J4533BS MILR55182 Request
MILR55182 Request RNC70J4533BS MILR55182 /fsg Request RNC70J4533BS MILR55182 https//www.nsnlookup.com
Request RNC70J4533BS MILR55182 /fsg Request RNC70J4533BS MILR55182 /fsg Request RNC70J4533BS MILR55182
MILR55182 https//www.nsnlookup.com /fsg Request RNC70J4533BS MILR55182 Request RNC70J4533BS MILR55182
MILR55182 Request RNC70J4533BS MILR55182 https//www.nsnlookup.com /fsg Request RNC70J4533BS MILR55182
Request RNC70J4533BS MILR55182 Request RNC70J4533BS MILR55182 -6 MIL-R Request RNC70J4533BS MILR55182
Restrictions 5905-01-052-0988
5905-01-052-0988 is a Film Fixed Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-01-052-0988
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
Approved Sources 5905-01-052-0988
- Part Number
- Manufacturer
- Status
- RNC65H1232DS
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MILR55182
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 5905-01-052-0988
- Characteristic
- Specifications
- Electrical Resistance [AAPP]
- Specifications
- 12.300 Kilohms
- Ambient Temp In Deg Celsius At Full Rated Power [AAQF]
- 125.0
- Ambient Temp In Deg Celsius At Zero Percent Rated Power [AAQG]
- 175.0
- Body Diameter [ABPM]
- 0.188 Inches Nominal
- Body Length [ADAQ]
- 0.625 Inches Nominal
- Inclosure Method [AAQZ]
- Encapsulated
- Power Dissipation Rating In Watts [AEFB]
- 0.250 Free Air
- Reliability Failure Rate Level In Percent [AARH]
- 0.001
- Reliability Indicator [AARG]
- Established
- Resistance Tolerance In Percent [AAPQ]
- -0.500/+0.500
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-55182/5H Government Specification
- Style Designator [STYL]
- Axial Terminal Each End
- Temp Range Of Temp Coefficient In Deg Celsius [AAQH]
- -55.0/+175.0
- Temp Coefficient Of Resistance In Ppm Per Deg Celsius [AAPE]
- -50.0/+50.0
- Terminal Length [ABJT]
- 1.500 Inches Nominal
- Terminal Type [AARB]
- Wire Lead
- Test Data Document [TEST]
- 81349-Mil-R-55182 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
NATO Stock Numbers Related to 5905-01-052-0988
Freight Information 5905-01-052-0988
5905-01-052-0988 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-052-0988 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-052-0988 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5905-01-052-0988 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-01-052-0988 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-052-0988
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- ESD sensitive electronic device requirements of MIL-STD-129 apply
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566 or PPP-B-676, Folding or Setup Box