Premium Information is available for this item - Upgrade for $1 a day
5905-01-025-9030
Nonprecision Nonwire Wound Variable Resistor
5905010259030 010259030 MIL-PRF-94/3 RV6SAYSD104E MILR94-3
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Nonwire Wound Variable Resistor
August 2023
27
Marketplace 5905-01-025-9030
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-025-9030 5+ Documents (More...)
MILR94-3 RESISTOR,VARIABLE,NONWIRE WOUND,NONPRECISION 51 EA NS Request Quotation Updated Every Day 5905
-01-025-9030 RQST NE Updated Every Day 5905-01-025-9030 RQST Updated Every Day 5905-01-025-9030 RQST
A resistor in which a sliding or rolling contact moves over MILR94-3 RESISTOR,VARIABLE MILR94-3 A
5905 RESISTOR,VARIABLE MILR94-3 A resistor in which a sliding or rolling contact moves over MILR94-3
A resistor in which a sliding or rolling contact moves over MILR94-3 RESISTOR,VARIABLE MILR94-3 A
or rolling contact moves over MILR94-3 RESISTOR,VARIABLE MILR94-3 A resistor in which a sliding or rolling
RV6TAYSA502C MILR94-3 A resistor in which a https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00
-466-1163 5905004661163 004661163,MIL-PRF-94/3 MILR94-3 A resistor in which a sliding or rolling contact
A or rolling contact moves over MILR94-3 RESISTOR,VARIABLE MILR94-3 A resistor in which a sliding or
RESISTOR,VARIABLE MILR94-3 A resistor in which a sliding or rolling contact moves over MILR94-3
Restrictions 5905-01-025-9030
5905-01-025-9030 is a Nonprecision Nonwire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown. This item is sensitive to Electrostatic Discharge.
End Users 5905-01-025-9030
- US Army (A918)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A196
- Supplementary Receivers:
- BD
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- US Marine Corps (MC49)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- MC13
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HDJB
- France (ZF01)
- Effective Date:
- 1 May 2015
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Aug 1995
Approved Sources 5905-01-025-9030
- Part Number
- Manufacturer
- Status
- RV6SAYSD104E
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-94/3
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MILR94-3
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-01-025-9030
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 292.0 Minimum And 298.0 Maximum
- Electrical Resistance Per Section [CQCC]
- 100.0 Kilohms Single Section
- Actuator Travel Control Feature [CRSX]
- Stops
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 70.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 120.0 Single Section
- Body Diameter [ABPM]
- 0.500 Inches Nominal
- Body Length [ADAQ]
- 0.531 Inches Nominal
- Body Style [AAQL]
- Cylindrical Bushing Mounted
- Features Provided [CBBL]
- Shaft Seal
- Mounting Bushing Length [ADAP]
- 0.250 Inches Nominal
- Mounting Method [AXGY]
- Standard Bushing
- Nonturn Device Location [AEFN]
- At 10'30 Oclock
- Nonturn Device Radius [AEFP]
- 0.245 Inches Nominal
- Power Dissipation Rating Per Section In Watts [CRGD]
- 0.25 Free Air Single Section
- Resistance Temp Characteristic Range Per Section In Percent [CQDB]
- -3.0 To 0.0 -55 Deg Celsius Single Section And -5.0 To 10.0 -25 Deg Celsius Single Section And -5.0 To 10.0 25 Deg Celsius Single Section And +0.0 To 3.0 120 Deg Celsius Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -20.0 To 20.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 292.0 Minimum And 298.0 Maximum
- Screw Thread Quantity Per Inch [AJYQ]
- 32.0
- Screw Thread Series Designator [AJYP]
- Unef
- Screw Thread Diameter [AJYN]
- 0.250 Inches Nominal
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.125 Inches Nominal
- Shaft Length [ABXF]
- 0.875 Inches Nominal
- Shaft Style [AEDX]
- Round, Slotted
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-94/3 Government Specification
- Terminal Location [APXH]
- Rear End
- Terminal Type And Quantity [TTQY]
- 3 Tab, Solder Lug
- Test Data Document [TEST]
- 81349-Mil-R-94 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5905-01-025-9030
DLA Procurement Analysis 5905-01-025-9030
Management Data 5905-01-025-9030
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
Similar Supply Items to 5905-01-025-9030
Freight Information 5905-01-025-9030
5905-01-025-9030 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-025-9030 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-025-9030 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-025-9030 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-01-025-9030 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-025-9030
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5905-01-025-9030 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: