Premium Information is available for this item - Upgrade for $1 a day
5905-01-016-0034
Nonprecision Wire Wound Variable Resistor
5905010160034 010160034 2417-50OHMSPORM10PCT 272894-001
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Wire Wound Variable Resistor
May 2023
4
Marketplace 5905-01-016-0034
Request a Quotation from participating marketplace vendors
Related Documents 5905-01-016-0034 4+ Documents (More...)
Updated Every 15 Minutes 5905-01-016-0034 BUY NE FedMall Updated Every Day 5905-01-016-0034 RQST NE
Updated Every Day 5905-01-016-0034 RQST Updated Every Day 5905-01-016-0034 RQST NE Related Documents
Wire Wound Variable Resistor -01-016-0034Nonprecision Wire Wound Variable Resistor5905010160034 010160034
2417-50OHMSPORM10PCT 272894 Request a Quotation from participating marketplace vendors Request Subscribe
Nonprecision Wire Wound Variable Resistor BUY NE FedMall Updated Every Day 5905-01-016-0034 RQST
NE Updated Every Day 5905-01-016-0034 RQST Updated Every Day 5905-01-016-0034 RQST NE Related Documents
Variable Resistor Upgrade 5905-01-016-0034Nonprecision Wire Wound Variable Resistor5905010160034 010160034
2417-50OHMSPORM10PCT Request Subscribe to View Vendor Details... 272894-001 RESISTOR 1 EA NS Request
Restrictions 5905-01-016-0034
5905-01-016-0034 is a Nonprecision Wire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-01-016-0034
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-01-016-0034
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
Approved Sources 5905-01-016-0034
- Part Number
- Manufacturer
- Status
- 2417-50OHMSPORM10PCT
- Manufacturer
- 91637 - Vishay Dale Electronics, Llc (Active)
- Primary Buy
- Primary Buy
- 272894-001
- 65092 - Solartron Electronics Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-01-016-0034
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 7200.0 Nominal
- Electrical Resistance Per Section [CQCC]
- 50.0 Ohms Single Section
- Actuator Travel Control Feature [CRSX]
- Clutch
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 40.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 125.0 Single Section
- Body Height [ADAU]
- 0.310 Inches Nominal
- Body Length [ADAQ]
- 0.750 Inches Nominal
- Body Width [ADAT]
- 0.160 Inches Nominal
- Body Style [AAQL]
- Rectangular
- Center To Center Distance Between Center Terminal And Outside Terminal [CQCM]
- 0.200 Inches Nominal
- Center To Center Distance Between Terminals [AEHT]
- 0.500 Inches Nominal
- Center To Center Distance Between Terminal Rows [AYQR]
- 0.100 Inches Nominal
- Mounting Method [AXGY]
- Terminal
- Power Dissipation Rating Per Section In Watts [CRGD]
- 1.0 Free Air Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0 To 10.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 7200.0 Nominal
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.100 Inches Nominal
- Shaft Length [ABXF]
- 0.130 Inches Nominal
- Shaft Style [AEDX]
- Round, Slotted
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius [CRFJ]
- -50.0 To 50.0 Single Section
- Terminal Location [APXH]
- Lower Adjacent Side Two Rows
- Terminal Length [ABJT]
- 0.150 Inches Nominal
- Terminal Type And Quantity [TTQY]
- 3 Pin
DLA Procurement Analysis 5905-01-016-0034
Management Data 5905-01-016-0034
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5905-01-016-0034
Freight Information 5905-01-016-0034
5905-01-016-0034 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-01-016-0034 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-01-016-0034 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-01-016-0034 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-01-016-0034 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-01-016-0034
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5905-01-016-0034 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: