Premium Information is available for this item - Upgrade for $1 a day
5905-00-989-3694
Nonprecision Wire Wound Variable Resistor
5905009893694 009893694 MIL-PRF-22/10 RP351FD500KK M22/10-00121FD MILR22-10
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Wire Wound Variable Resistor
May 2023
11
Marketplace 5905-00-989-3694
Request a Quotation from participating marketplace vendors
Related Documents 5905-00-989-3694 5+ Documents (More...)
(Identification) 1/2 NSN 5905-00-989-3694 (Identification) 2/2 - - 1.
BUY NE FedMall Updated Every Day 5905-00-989-3694 RQST NE Updated Every Day 5905-00-989-3694 RQST
RP351FK252KK M22/10-00251FK MILR22-10 A resistor in which a sliding or rolling contact moves over
Nonprecision Wire Wound Variable Resistor RP351FD500KK M22/10-00121FD MILR22-10 A resistor in which
RP351FK252KK M22/10-00251FK MILR22-10 A resistor in which a sliding or rolling contact moves over
A resistor in which a sliding or rolling contact moves over RP351FJ351KK M22/10-00181FJ MILR22-10
A resistor in which a sliding or rolling contact moves over RP351FJ351KK M22/10-00181FJ MILR22-10
RP351FD500KK M22/10-00121FD MILR22-10 A resistor in which a sliding or rolling contact moves over RP351FJ351KK
RP351FJ351KK M22/10-00181FJ MILR22-10 A resistor in which a sliding or rolling contact moves over
RP351FD500KK M22/10-00121FD MILR22-10 A resistor in which a sliding or rolling contact moves over RP351FJ351KK
Restrictions 5905-00-989-3694
5905-00-989-3694 is a Nonprecision Wire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-00-989-3694
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-989-3694
- US Army (A918)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A196
Approved Sources 5905-00-989-3694
- Part Number
- Manufacturer
- Status
- M22/10-00121FD
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-22/10
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- RP351FD500KK
- 81349 - Military Specifications (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MILR22-10
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-00-989-3694
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 305.0 Minimum And 315.0 Maximum
- Electrical Resistance Per Section [CQCC]
- 50.0 Ohms Single Section
- Actuator Travel Control Feature [CRSX]
- Stops
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 25.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 340.0 Single Section
- Body Diameter [ABPM]
- 5.090 Inches Maximum
- Body Length [ADAQ]
- 2.160 Inches Maximum
- Body Style [AAQL]
- Cylindrical Hole/Slot Mounted
- First Flat Length [ABNB]
- 0.719 Inches Nominal
- Flat Height [ABNC]
- 0.344 Inches Nominal
- Mounting Facility Quantity [AKPV]
- 2
- Mounting Hole/Stud Circle Diameter [AEDE]
- 0.875 Inches Nominal
- Mounting Method [AXGY]
- Threaded Hole
- Overall Diameter [ADAV]
- 5.515 Inches Maximum
- Overall Length [ABHP]
- 3.082 Inches Maximum
- Power Dissipation Rating Per Section In Watts [CRGD]
- 225.0 Heat Sink Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0 To 10.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 305.0 Minimum And 315.0 Maximum
- Screw Thread Diameter [AJYN]
- 0.250 Inches Nominal
- Screw Thread Quantity Per Inch [AJYQ]
- 20.0
- Screw Thread Series Designator [AJYP]
- Unc
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.375 Inches Nominal
- Shaft Style [AEDX]
- Round, Flatted
- Shaft Length [ABXF]
- 0.875 Inches Nominal
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-22/10 Government Specification
- Terminal Location [APXH]
- Radially Positioned Over Less Than Half The Circumference
- Terminal Type And Quantity [TTQY]
- 3 Tab, Solder Lug
- Test Data Document [TEST]
- 81349-Mil-R-22 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5905-00-989-3694
Management Data 5905-00-989-3694
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5905-00-989-3694
Freight Information 5905-00-989-3694
5905-00-989-3694 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-989-3694 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-989-3694 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-00-989-3694 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-00-989-3694 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-989-3694
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 5905-00-989-3694 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: