Premium Information is available for this item - Upgrade for $1 a day
5905-00-950-7660
Precision Wire Wound Variable Resistor
5905009507660 009507660 138-001-0001 WP1/2-108
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION. View more Precision Wire Wound Variable Resistor
May 2023
6
Marketplace 5905-00-950-7660
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5905-00-950-7660 2+ Documents (More...)
Restrictions 5905-00-950-7660
5905-00-950-7660 is a Precision Wire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5905-00-950-7660
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-950-7660
- National Security Agency (DGX1)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- DTX1
- Supplementary Receivers:
- TX
Approved Sources 5905-00-950-7660
- Part Number
- Manufacturer
- Status
- 138-001-0001
- Manufacturer
- 95542 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
- WP1/2-108
- 94603 - Honeywell Sensing & Control (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- WP1/2-108
- 06880 - Data Instruments Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-00-950-7660
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 287.0 Minimum And 287.0 Minimum And 297.0 Maximum297.0 Maximum
- Electrical Resistance Per Section [CQCC]
- 2.0 Kilohms Single Section2.0 Kilohms Single Section
- Actuator Travel Control Feature [CRSX]
- Continuous Motion
- Actuator Type [AEFD]
- Single Shaftsingle Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 85.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 150.0 Single Section
- Body Diameter [ABPM]
- 0.500 Inches Nominal0.500 Inches Nominal
- Body Style [AAQL]
- Cylindrical Servo Mounted
- Fixed Tap Quantity Per Section [CRJS]
- 1 Single Section
- Function Characteristic Per Section [CSBX]
- Single Section Linear
- Function Conformity Per Section [CRGM]
- Single Section Independent Linearity
- Function Conformity Tolerance Per Section [CQFL]
- -1.00 To 1.00 Single Section
- Maximum Starting Torque [AEFK]
- 1.50 Inch-Ounces1.50 Inch-Ounces
- Maximum Running Torque [AEFL]
- 0.75 Inch-Ounces0.75 Inch-Ounces
- Mounting Lip Depth [AEDA]
- 0.6410 Inches Minimum And 0.6410 Inches Minimum And 0.6510 Inches Maximum0.6510 Inches Maximum
- Mounting Lip Diameter [AECZ]
- 0.5000 Inches Nominal0.5000 Inches Nominal
- Mounting Method [AXGY]
- Clamp Ringclamp Ring
- Lateral Runout [AEGA]
- 0.001 Inches0.001 Inches
- Power Dissipation Rating Per Section In Watts [CRGD]
- 4.0 Free Air Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -3.0 To 3.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 360.0 Nominal
- Section Quantity [AAPN]
- 1
- Shaft Bearing Type [AEDZ]
- Ballball
- Shaft Diameter [ABWV]
- 0.1243 Inches Minimum And 0.1243 Inches Minimum And 0.1245 Inches Maximum
- Shaft Length [ABXF]
- 0.250 Inches Nominal0.250 Inches Nominal
- Shaft End Play [AEFY]
- 0.006 Inches0.006 Inches
- Shaft Radial Play [AEGC]
- 0.001 Inches0.001 Inches
- Shaft Style [AEDX]
- Round, Slottedround, Slotted
- Overall Diameter [ADAV]
- 0.500 Inches Nominal0.500 Inches Nominal
- Overall Length [ABHP]
- 1.047 Inches Minimum And 1.057 Inches Maximum1.057 Inches Maximum
- Pilot Diameter Runout [AEGB]
- 0.001 Inches0.001 Inches
- Pilot Diameter [AAVL]
- 0.4365 Inches Minimum And 0.4370 Inches Maximum
- Pilot Length [AAVM]
- 0.0570 Inches Minimum And 0.0670 Inches Maximum
- Undercut Diameter [ABPA]
- 0.4365 Inches Minimum And 0.4365 Inches Minimum And 0.437 Inches Maximum0.437 Inches Maximum
- Undercut Width [ABPC]
- 0.0570 Inches Minimum And 0.0570 Inches Minimum And 0.0670 Inches Maximum0.0670 Inches Maximum
- Tap Location Tolerance Per Section [CRKS]
- -2.0 To 2.0 Deg Angular Rotation Single Section
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius [CRFJ]
- -50.0 To 50.0 Single Section
- Terminal Location [APXH]
- Rear Endrear End
- Terminal Type And Quantity [TTQY]
- 4 Turret
DLA Procurement Analysis 5905-00-950-7660
Management Data 5905-00-950-7660
NATO Stock Numbers Related to 5905-00-950-7660
Freight Information 5905-00-950-7660
5905-00-950-7660 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-950-7660 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-950-7660 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-00-950-7660 is not classified as a special type of cargo when transported by water. 5905-00-950-7660 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-950-7660
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5905-00-950-7660 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: