Premium Information is available for this item - Upgrade for $1 a day
5905-00-948-4634
Nonprecision Wire Wound Variable Resistor
5905009484634 009484634 1141642-2 3010P1-501 DMS 85044B
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Wire Wound Variable Resistor
November 2023
12
Marketplace 5905-00-948-4634
Request a Quotation from participating marketplace vendors
Related Documents 5905-00-948-4634 5+ Documents (More...)
(Identification) 1/2 NSN 5905-00-948-4634 (Identification) 2/2 - - 1.
RQST NE Updated Every Day 5905-00-948-4634 RQST Updated Every Day 5905-00-948-4634 RQST NE Related
Every Day 6625-01-271-2936 RQST Updated Every Day https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00-948-4634
1141642-2 3010P1-501 DMS 85044B -59/fsc-5905/us 5905-00-948-4634 Nonprecision Wire Wound Variable Resistor
Wire Wound Variable Resistor 00-948-4634Nonprecision Wire Wound Variable Resistor5905009484634 009484634
1141642-2 3010P1-501 DMS 85044B 3635Nonprecision Nonwire Wound Variable Resistor5905010273635 010273635
8237Nonprecision Wire Wound Variable Resistor5905007598237 007598237 1288-50K 1C3518-5 3010L1-503 DMS 85044B
0102736352237842-13012L-72-203DMS 85044B 1288-50K1C3518 https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00-948-4634
1141642 3010P1-501 DMS 85044B -59/fsc-5905/us 5905-00-948-4634 Nonprecision Wire Wound Variable Resistor
Resistor Account Upgrade 5905-00-948-4634Nonprecision Wire Wound Variable Resistor5905009484634 009484634
Restrictions 5905-00-948-4634
5905-00-948-4634 is a Nonprecision Wire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5905-00-948-4634
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-948-4634
- US Navy (N9BN)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- N9ND
- Israel (YD01)
- Effective Date:
- 1 Aug 2016
- United Kingdom (ZK01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5905-00-948-4634
- Part Number
- Manufacturer
- Status
- 1141642-2
- Manufacturer
- 23667 - Smiths Detection Inc. (Active)
- Source Control
- Source Control
- 3010P1-501
- 80294 - Bourns Instruments Inc (Obsolete)
- Original Design
- Original Design
- DMS 85044B
- 16236 - Dla Land And Maritime (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-00-948-4634
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Electrical Resistance Per Section [CQCC]
- 500.0 Ohms Single Section
- Actuator Travel Control Feature [CRSX]
- Stops
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 70.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 175.0 Single Section
- Body Height [ADAU]
- 0.296 Inches Minimum And 0.328 Inches Maximum
- Body Length [ADAQ]
- 1.234 Inches Minimum And 1.266 Inches Maximum
- Body Width [ADAT]
- 0.270 Inches Minimum And 0.290 Inches Maximum
- Body Style [AAQL]
- Rectangular W/Mounting Holes/Slots
- Center To Center Distance Between Center Terminal And Outside Terminal [CQCM]
- 0.290 Inches Minimum And 0.310 Inches Maximum
- Center To Center Distance Between Terminals [AEHT]
- 0.690 Inches Minimum And 0.710 Inches Maximum
- Contact Arm Electrical Off Position [AEEZ]
- Fully Cw
- Features Provided [CBBL]
- Nonmetallic Shaft
- Maximum Starting Torque [AEFK]
- 5.00 Inch-Ounces
- Mounting Facility Quantity [AKPV]
- 2
- Mounting Hole Diameter [ABTB]
- 0.088 Inches Minimum
- Mounting Method [AXGY]
- Unthreaded Hole
- Overall Height [ABKW]
- 0.780 Inches Minimum And 0.844 Inches Maximum
- Overall Width [ABMK]
- 0.270 Inches Minimum And 0.290 Inches Maximum
- Overall Length [ABHP]
- 1.280 Inches Minimum And 1.344 Inches Maximum
- Lateral Distance Between Mounting Hole Centers [AGTP]
- 0.995 Inches Minimum And 1.005 Inches Maximum
- Power Dissipation Rating Per Section In Watts [CRGD]
- 1.0 Free Air Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -5.0 To 5.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 9000.0 Nominal
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.109 Inches Minimum And 0.141 Inches Maximum
- Shaft Length [ABXF]
- 0.046 Inches Minimum And 0.078 Inches Maximum
- Shaft Style [AEDX]
- Round, Slotted
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius [CRFJ]
- -50.0 To 50.0 Single Section
- Terminal Location [APXH]
- Lower Adjacent Side Single Row
- Terminal Length [ABJT]
- 0.484 Inches Minimum And 0.516 Inches Maximum
- Terminal Type And Quantity [TTQY]
- 3 Pin
- Test Data Document [TEST]
- 23667-1141642-2 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5905-00-948-4634
- Last Stock Position:
- 224 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5905-00-948-4634
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5905-00-948-4634
Freight Information 5905-00-948-4634
5905-00-948-4634 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-948-4634 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-948-4634 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-00-948-4634 is not classified as a special type of cargo when transported by water. 5905-00-948-4634 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-948-4634
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-P-130, Laminated and Creped Wrapping Paper
- No Requirement
- Not Applicable
- --
- Special requirements
- MIL-P-130, Laminated and Creped Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566 or PPP-B-676, Folding or Setup Box
Contracting Technical Data File (CTDF) 5905-00-948-4634 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: