Premium Information is available for this item - Upgrade for $1 a day
5905-00-891-1680
Precision Nonwire Wound Variable Resistor
5905008911680 008911680 99971SCEE102-1 60826A 32C2-1015
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Precision Nonwire Wound Variable Resistor
May 2023
13
Marketplace 5905-00-891-1680
Request a Quotation from participating marketplace vendors
Related Documents 5905-00-891-1680 1+ Documents (More...)
(Identification) 1/2 NSN 5905-00-891-1680 (Identification) 2/2 - - 1.
United States (US) 4. 5905-00-891-1680 Marketplace Restrictions Approved Sources Datasheet Management
Restrictions 5905-00-891-1680
5905-00-891-1680 is a Precision Nonwire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5905-00-891-1680
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-891-1680
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- KE
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
Approved Sources 5905-00-891-1680
- Part Number
- Manufacturer
- Status
- 99971SCEE102-1
- Manufacturer
- 26512 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
- 60826A
- 10112 - General Dynamics Motion Control Llc (Active)
- Secondary Buy
- Secondary Buy
- 32C2-1015
- 19176 - Servo Instrument Corporation (Active)
- Secondary Buy
- Secondary Buy
- 32C2-1015
- 24017 - Cognitive Resources Inc Dba Gamewell (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-00-891-1680
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 354.0 Nominal
- Electrical Resistance Per Section [CQCC]
- 10.0 Percent, Rated Amperes C And Better Finish
- Electrical Resistance Per Section [CQCC]
- 49.33 Percent, Rated Amperes C And Better Industrial Clears
- Actuator Travel Control Feature [CRSX]
- Continuous Motion
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 85.0 All Sections
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 150.0 All Sections
- Body Diameter [ABPM]
- 2.000 Inches Nominal
- Body Length [ADAQ]
- 1.750 Inches Maximum
- Body Style [AAQL]
- Cylindrical Servo Mounted
- Fixed Tap Quantity Per Section [CRJS]
- 2 1St Section
- Fixed Tap Quantity Per Section [CRJS]
- 1 2Nd Section
- Function Characteristic Per Section [CSBX]
- All Sections Graph
- Function Conformity Per Section [CRGM]
- All Sections Absolute Conformity
- Function Conformity Tolerance Per Section [CQFL]
- -0.40/+0.40 All Sections
- Maximum Starting Torque [AEFK]
- 2.00 Inch-Ounces
- Maximum Stop Torque [AEFM]
- 37.50 Inch-Ounces
- Maximum Running Torque [AEFL]
- 1.00 Inch-Ounces
- Mounting Lip Depth [AEDA]
- 0.0600 Inches Nominal
- Mounting Lip Diameter [AECZ]
- 2.0000 Inches Nominal
- Mounting Method [AXGY]
- Clamp Ring
- Lateral Runout [AEGA]
- 0.002 Inches
- Power Dissipation Rating Per Section In Watts [CRGD]
- 5.0 Free Air All Sections
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -5.0/+5.0 All Sections
- Rotary Actuator Travel In Angular Deg [CQCK]
- 360.0 Nominal
- Section Quantity [AAPN]
- 2
- Shaft Diameter [ABWV]
- 0.2495 Inches Minimum And 0.2500 Inches Maximum
- Shaft End Play [AEFY]
- 0.005 Inches
- Shaft Radial Play [AEGC]
- 0.002 Inches
- Shaft Runout [AEFZ]
- 0.002 Inches
- Shaft Style [AEDX]
- Round
- Shaft Length [ABXF]
- 0.562 Inches Minimum And 0.657 Inches Maximum
- Pilot Length [AAVM]
- 0.0600 Inches Nominal
- Pilot Diameter Runout [AEGB]
- 0.001 Inches
- Pilot Diameter [AAVL]
- 1.8745 Inches Minimum And 1.8750 Inches Maximum
- Undercut Diameter [ABPA]
- 1.8745 Inches Minimum And 1.8750 Inches Maximum
- Undercut Width [ABPC]
- 0.0600 Inches Nominal
- Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation [CQCH]
- 123.0 2Nd Section
- Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation [CQCH]
- 30.0 1St Section And 60.0 2Nd Section
- Tap Location Tolerance Per Section [CRKS]
- -1.0/+1.0 Deg Angular Rotation All Sections
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius [CRFJ]
- -400.0/+400.0 All Sections
- Terminal Location [APXH]
- Radially Positioned Over More Than Half The Circumference
- Terminal Type And Quantity [TTQY]
- 9 Tab, Solder Lug
- Test Data Document [TEST]
- 26512-99971Scee102 Drawing (This Is The Basic Governing Drawing, Such As A Contractor Drawing, Original Equipment Manufacturer Drawing, Etc.; Excludes Any Specification, Standard Or Other Document That May Be Referenced In A Basic Governing Drawing)
DLA Procurement Analysis 5905-00-891-1680
Management Data 5905-00-891-1680
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5905-00-891-1680
Freight Information 5905-00-891-1680
5905-00-891-1680 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-891-1680 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-891-1680 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-00-891-1680 is not classified as a special type of cargo when transported by water. 5905-00-891-1680 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-891-1680
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5905-00-891-1680 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: