5905-00-889-0239

5310-66-148-9704 5310661489704 661489704 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

Fixed Resistor 1 Jan 1962 5905-00-866-4087 Noninductive Wire Wound Fixed Resistor 1 Jan 1962 5905-00-889-0239

4820-66-079-1167 4820660791167 660791167 is an item in the form of one or more thin flexible sheets normally designed to form a tight seal between chambers of a valve, and to transmit motion to a valve disk either directly or through a mechanical linkage. the surface of the item(s) may not be formed or molded to have a beaded or rolled edge, ribs, or any other raised surfaces. the item may contain bolt holes and/or a center hole. excludes diaphragm, valve, special shaped and gasket.