Premium Information is available for this item - Upgrade for $1 a day
5905-00-882-3768
Nonprecision Wire Wound Variable Resistor
5905008823768 008823768 CM27192-12 08W1-2630 AP05-C13J-12 576R080H12 APW1-2-104-12 AP05C13J12
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Wire Wound Variable Resistor
May 2023
14
Marketplace 5905-00-882-3768
Request a Quotation from participating marketplace vendors
Related Documents 5905-00-882-3768 3+ Documents (More...)
(Identification) 1/2 NSN 5905-00-882-3768 (Identification) 2/2 - - 1.
United States (US) 4. 5905-00-882-3768 Marketplace Restrictions Approved Sources Datasheet Management
Resistor Account Upgrade 5905-00-882-3768Nonprecision Wire Wound Variable Resistor5905008823768 008823768
CM27192 /www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00-882-3768 Nonprecision Wire Wound Variable Resistor
//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00 https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00-882-3768
Resistor Account Upgrade 5905-00-882-3768Nonprecision Wire Wound Variable Resistor5905008823768 008823768
Restrictions 5905-00-882-3768
5905-00-882-3768 is a Nonprecision Wire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-00-882-3768
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-882-3768
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- KE
- Israel (YD01)
- Effective Date:
- 1 Aug 2016
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5905-00-882-3768
- Part Number
- Manufacturer
- Status
- CM27192-12
- Manufacturer
- 12697 - Clarostat Sensors And Controls (Active)
- Primary Buy
- Primary Buy
- 08W1-2630
- 19176 - Servo Instrument Corporation (Active)
- Secondary Buy
- Secondary Buy
- AP05-C13J-12
- 18065 - Samarius Precision Instruments, Inc. (Active)
- Secondary Buy
- Secondary Buy
- APW1-2-104-12
- 06880 - Data Instruments Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- APW1-2-104-12
- 94603 - Honeywell Sensing & Control (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AP05C13J12
- 02297 - Ace Electronics Associates Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 576R080H12
- 97942 - Northrop Grumman Systems Corporation (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5905-00-882-3768
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Electrical Resistance Per Section [CQCC]
- 25.0 Kilohms Single Section
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 85.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 150.0 Single Section
- Body Diameter [ABPM]
- 0.480 Inches Minimum And 0.520 Inches Maximum
- Body Length [ADAQ]
- 0.580 Inches Maximum
- Body Style [AAQL]
- Cylindrical Bushing Mounted
- Mounting Bushing Length [ADAP]
- 0.360 Inches Minimum And 0.400 Inches Maximum
- Mounting Method [AXGY]
- Locking Bushing
- Nonturn Device Location [AEFN]
- At 6 Oclock
- Nonturn Device Radius [AEFP]
- 0.170 Inches Minimum And 0.210 Inches Maximum
- Overall Diameter [ADAV]
- 0.480 Inches Minimum And 0.520 Inches Maximum
- Overall Length [ABHP]
- 1.220 Inches Nominal
- Power Dissipation Rating Per Section In Watts [CRGD]
- 2.0 Free Air Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -5.0 To 5.0 Single Section
- Screw Thread Diameter [AJYN]
- 0.250 Inches Nominal
- Screw Thread Quantity Per Inch [AJYQ]
- 32.0
- Screw Thread Series Designator [AJYP]
- Unef
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.120 Inches Minimum And 0.130 Inches Maximum
- Shaft Length [ABXF]
- 0.420 Inches Minimum And 0.460 Inches Maximum
- Shaft Style [AEDX]
- Round, Slotted
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius [CRFJ]
- -70.0 To 70.0 Single Section
- Terminal Location [APXH]
- Rear End
- Terminal Type And Quantity [TTQY]
- 3 Tab, Solder Lug
Weapon Systems (WSDC) 5905-00-882-3768
DLA Procurement Analysis 5905-00-882-3768
Management Data 5905-00-882-3768
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5905-00-882-3768
Freight Information 5905-00-882-3768
5905-00-882-3768 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-882-3768 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-882-3768 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-00-882-3768 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-00-882-3768 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-882-3768
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-P-130, Laminated and Creped Wrapping Paper
- No Requirement
- Not Applicable
- --
- Special requirements
- MIL-P-130, Laminated and Creped Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566 or PPP-B-676, Folding or Setup Box
Contracting Technical Data File (CTDF) 5905-00-882-3768 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: