Premium Information is available for this item - Upgrade for $1 a day
5905-00-761-7097
Nonprecision Nonwire Wound Variable Resistor
5905007617097 007617097 151-01 15-010 300344
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Nonwire Wound Variable Resistor
May 2023
6
Marketplace 5905-00-761-7097
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5905-00-761-7097 5+ Documents (More...)
(Identification) 1/2 NSN 5905-00-761-7097 (Identification) 2/2 - - 1.
United States (US) 4. 5905-00-761-7097 Marketplace Restrictions Approved Sources Datasheet Management
-234-7963 Galleggiante Da 3/8 4510152347963 152347963 Computer Subassembly 7050219149776219149776 300344
enable JavaScript in your web browser . 9905-14-042-3285Instruction Plate9905140423285 14042328580-300344
-903 300344-902 Two or more different types of items, having a common mounting or mounted on each other
www.nsnlookup.com /fsg-70/fsc-7050/ca 7050-21-914-9776 Computer Subassembly 7050219149776219149776 300344
-903 300344-902 Two or more different types of items, having a common mounting or mounted on each other
Galleggiante Da 3/8 4510152347963152347963 -903 300344-902 Two or more different types of https enable
-234-7963 Galleggiante Da 3/8 4510152347963 152347963 Computer Subassembly 7050219149776219149776 300344
https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00-761-7097 5905007617097 007617097,151-01,15-010,300344
Restrictions 5905-00-761-7097
5905-00-761-7097 is a Nonprecision Nonwire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-00-761-7097
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-761-7097
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Supplementary Collaborators:
- HD
Approved Sources 5905-00-761-7097
- Part Number
- Manufacturer
- Status
- 15-010
- Manufacturer
- 89178 - Stancil Corp (Active)
- Original Design
- Original Design
- 151-01
- 58756 - Cts Corp Electromechanical Div (Active)
- Secondary Buy
- Secondary Buy
- 300344
- 34263 - Cts Corp In Texas Dba Cts (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 300344
- 71450 - Cts Corp (Replaced)
- Advisory Reference
- Advisory Reference
Datasheet 5905-00-761-7097
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 300.0 Nominal
- Electrical Resistance Per Section [CQCC]
- 5.0 Kilohms Single Section
- Actuator Travel Control Feature [CRSX]
- Stops
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 55.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 85.0 Single Section
- Body Diameter [ABPM]
- 0.938 Inches Nominal
- Body Length [ADAQ]
- 0.453 Inches Nominal
- Body Style [AAQL]
- Cylindrical Bushing Mounted
- Mounting Bushing Length [ADAP]
- 0.250 Inches Nominal
- Mounting Method [AXGY]
- Standard Bushing
- Fragility Factor [AFJN]
- Moderately Rugged
- Overall Diameter [ADAV]
- 1.071 Inches Maximum
- Overall Length [ABHP]
- 1.078 Inches Nominal
- Power Dissipation Rating Per Section In Watts [CRGD]
- 0.5 Heat Sink Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -20.0 To 20.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 300.0 Nominal
- Screw Thread Diameter [AJYN]
- 0.375 Inches Nominal
- Screw Thread Quantity Per Inch [AJYQ]
- 32.0
- Screw Thread Series Designator [AJYP]
- Unef
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.225 Inches Nominal
- Shaft Length [ABXF]
- 0.625 Inches Nominal
- Shaft Style [AEDX]
- Round
- Terminal Location [APXH]
- Radially Positioned Over Less Than Half The Circumference
- Terminal Type And Quantity [TTQY]
- 3 Tab, Solder Lug
DLA Procurement Analysis 5905-00-761-7097
Management Data 5905-00-761-7097
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5905-00-761-7097
Freight Information 5905-00-761-7097
5905-00-761-7097 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-761-7097 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-761-7097 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-00-761-7097 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-00-761-7097 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-761-7097
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5905-00-761-7097 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: