Premium Information is available for this item - Upgrade for $1 a day
5905-00-752-3377
Nonprecision Nonwire Wound Variable Resistor
5905007523377 007523377 MIL-PRF-94/3 RV6LAYSA503E MILR94
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Nonwire Wound Variable Resistor
May 2023
21
Marketplace 5905-00-752-3377
Request a Quotation from participating marketplace vendors
Related Documents 5905-00-752-3377 5+ Documents (More...)
5905-00-752-3377 RQST NE Updated Every Day 5905-00-752-3377 RQST Updated Every Day 5905-00-752-3377
5905-00-752-3377 RQST Updated Every Day 5905-00-752-3377 5905-00-752-3377 RQST Updated Every Day 5905
https// MILR94-3 A resistor in which a sliding or rolling contact moves over an exposed area ,MIL-PRF
-94/3 Resistor5905005811422 https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00-752-3377 5905007523377
RV6SAYSD104A MILR94-3 A resistor in which a sliding or rolling contact moves over MILR94-3 RESISTOR,
5905007523377 007523377,MIL-PRF-94/3 5905004293112004293112,MIL-PRF-94/3RV6SAYSL104AMILR94-3 A
RV6LAYSA254C MILR94 A resistor in which a sliding or rolling contact moves over an exposed area
-59/fsc-5905/us 5905-00-752-3377 5905007523377 007523377,MIL-PRF-94/3 /fsg-59/fsc-5905/us 5905-00-617
https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00-752-3377 5905007523377 007523377,MIL-PRF-94/3 RV6SAYSD104A
MILR94-3 A resistor in which a sliding or rolling contact moves over MILR94-3 RESISTOR, MILR94 A resistor
Restrictions 5905-00-752-3377
5905-00-752-3377 is a Nonprecision Nonwire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-00-752-3377
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-752-3377
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- NIND
- Supplementary Collaborators:
- HDJB
- Brazil (YA01)
- Effective Date:
- 1 Dec 2001
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Jul 1997
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 5905-00-752-3377
- Part Number
- Manufacturer
- Status
- RV6LAYSA503E
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-94/3
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MILR94
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-00-752-3377
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Electrical Resistance Per Section [CQCC]
- 50.0 Kilohms Single Section
- Actuator Travel Control Feature [CRSX]
- Stops
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 70.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 120.0 Single Section
- Body Diameter [ABPM]
- 0.484 Inches Minimum And 0.516 Inches Maximum
- Body Length [ADAQ]
- 0.437 Inches Minimum And 0.469 Inches Maximum
- Body Style [AAQL]
- Cylindrical Bushing Mounted
- Features Provided [CBBL]
- Shaft Locking Device
- Maximum Starting Torque [AEFK]
- 6.00 Inch-Ounces
- Maximum Stop Torque [AEFM]
- 48.00 Inch-Ounces
- Mounting Bushing Length [ADAP]
- 0.500 Inches Nominal
- Mounting Method [AXGY]
- Locking Bushing
- Nonturn Device Location [AEFN]
- At 4 Oclock And At 10 Oclock
- Nonturn Device Radius [AEFP]
- 0.245 Inches Nominal
- Fragility Factor [AFJN]
- Moderately Rugged
- Overall Diameter [ADAV]
- 0.484 Inches Minimum And 0.516 Inches Maximum
- Overall Length [ABHP]
- 1.344 Inches Maximum
- Power Dissipation Rating Per Section In Watts [CRGD]
- 0.25 Free Air Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0 To 10.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 292.0 Minimum And 298.0 Maximum
- Screw Thread Diameter [AJYN]
- 0.250 Inches Nominal
- Screw Thread Quantity Per Inch [AJYQ]
- 32.0
- Screw Thread Series Designator [AJYP]
- Unef
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.125 Inches Nominal
- Shaft Length [ABXF]
- 0.625 Inches Nominal
- Shaft Style [AEDX]
- Round, Slotted
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-94/3 Government Specification
- Terminal Location [APXH]
- Rear End
- Terminal Type And Quantity [TTQY]
- 3 Tab, Solder Lug
- Test Data Document [TEST]
- 81349-Mil-R-94 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5905-00-752-3377
DLA Procurement Analysis 5905-00-752-3377
Management Data 5905-00-752-3377
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5905-00-752-3377
Freight Information 5905-00-752-3377
5905-00-752-3377 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-752-3377 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-752-3377 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-00-752-3377 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-00-752-3377 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-752-3377
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5905-00-752-3377 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: