Premium Information is available for this item - Upgrade for $1 a day
5905-00-751-7714
Nonprecision Wire Wound Variable Resistor
5905007517714 007517714 260S1502 990C146H09
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Wire Wound Variable Resistor
May 2023
22
Marketplace 5905-00-751-7714
Request a Quotation from participating marketplace vendors
Related Documents 5905-00-751-7714 3+ Documents (More...)
(Identification) 1/2 NSN 5905-00-751-7714 (Identification) 2/2 - - 1.
United States (US) 4. 5905-00-751-7714 Marketplace Restrictions Approved Sources Datasheet Management
https//www.nsnlookup.com /fsg-48/fsc-4820/fr 4820 https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00-751-7714
Nonprecision Wire Wound Variable Resistor 5310-99-766-3585Square Plain Nut5310997663585 997663585 007517714
A valve permitting flow in one direction only. https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00-751-7714
Upgrade your Account Upgrade 5905-00-751-7714Nonprecision Wire Wound Variable Resistor5905007517714 007517714
Restrictions 5905-00-751-7714
5905-00-751-7714 is a Nonprecision Wire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item contains gold. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-00-751-7714
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-751-7714
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- NASA (G170)
- Effective Date:
- 1 Apr 1991
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- NIND
- Supplementary Collaborators:
- KE
- Israel (YD01)
- Effective Date:
- 1 Aug 2016
- Kuwait (YK01)
- Effective Date:
- 1 Feb 2015
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Jul 1997
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5905-00-751-7714
- Part Number
- Manufacturer
- Status
- 260S1502
- Manufacturer
- 80294 - Bourns Instruments Inc (Obsolete)
- Primary Buy
- Primary Buy
- 990C146H09
- 18323 - Northrop Grumman Systems Corporation (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5905-00-751-7714
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Electrical Resistance Per Section [CQCC]
- 5.0 Kilohms Single Section
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 70.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 175.0 Single Section
- Body Height [ADAU]
- 0.297 Inches Minimum And 0.327 Inches Maximum
- Body Length [ADAQ]
- 1.240 Inches Minimum And 1.260 Inches Maximum
- Body Width [ADAT]
- 0.240 Inches Minimum And 0.260 Inches Maximum
- Body Style [AAQL]
- Rectangular W/Mounting Holes/Slots
- Mounting Facility Quantity [AKPV]
- 2
- Mounting Hole Diameter [ABTB]
- 0.086 Inches Minimum
- Mounting Method [AXGY]
- Unthreaded Hole
- Precious Material And Location [PMLC]
- Terminal Surfaces Gold
- Precious Material [PRMT]
- Gold
- Lateral Distance Between Mounting Hole Centers [AGTP]
- 0.995 Inches Minimum And 1.005 Inches Maximum
- Power Dissipation Rating Per Section In Watts [CRGD]
- 1.0 Free Air Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0 To 10.0 Single Section
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.125 Inches Nominal
- Shaft Bearing Type [AEDZ]
- Sleeve
- Shaft Length [ABXF]
- 0.063 Inches Nominal
- Shaft Style [AEDX]
- Round, Slotted
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius [CRFJ]
- -50.0 To 50.0 Single Section
- Terminal Location [APXH]
- Lower Adjacent Side Two Rows
- Terminal Type And Quantity [TTQY]
- 3 Tab, Solder Lug
Weapon Systems (WSDC) 5905-00-751-7714
DLA Procurement Analysis 5905-00-751-7714
Management Data 5905-00-751-7714
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5905-00-751-7714
Freight Information 5905-00-751-7714
5905-00-751-7714 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-751-7714 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-751-7714 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-00-751-7714 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-00-751-7714 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-751-7714
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- A-A-1249, Paper, Tissue
- No Requirement
- Not Applicable
- --
- Special requirements
- A-A-1249, Paper, Tissue
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566 or PPP-B-676, Folding or Setup Box
Contracting Technical Data File (CTDF) 5905-00-751-7714 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: