Premium Information is available for this item - Upgrade for $1 a day
5905-00-695-9547
Nonprecision Wire Wound Variable Resistor
5905006959547 006959547 MIL-DTL-6749 AN3155-25-100 MIL-R-6749
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Wire Wound Variable Resistor
November 2023
34
Marketplace 5905-00-695-9547
Request a Quotation from participating marketplace vendors
Related Documents 5905-00-695-9547 5+ Documents (More...)
(Identification) 1/2 NSN 5905-00-695-9547 (Identification) 2/2 - - 1.
MIL-R-6749 RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION 1 EA NS Request Quotation Updated Every Day 5905
MIL-R-6749 RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION 1 EA NS Request Quotation Updated Every Day 5905
Nonprecision Wire Wound Variable Resistor AN3155-25-100 MIL-R-6749 A resistor in which a sliding
Nonprecision Wire Wound Variable Resistor AN3155-25-100 MIL-R-6749 A resistor in which a sliding
204-075-365-7 204-075-365-007 MIL-R-6749 AN3155-50-25 A resistor in which a sliding or rolling
204-075-365-7 204-075-365-007 MIL-R-6749 AN3155-50-25 A resistor in which a sliding or rolling
25 RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION 1 EA NS Request Quotation Subscribe to View Vendor MIL-R-6749
MIL-R-6749 RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION 1 EA NS Request Quotation Updated Every Day 5905
MIL-R-6749 RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION 1 EA NS Request Quotation Updated Every Day 5905
Restrictions 5905-00-695-9547
5905-00-695-9547 is a Nonprecision Wire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-00-695-9547
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-695-9547
- US Army (A918)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A196
- Supplementary Receivers:
- CT
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HDKE
- Poland (WP01)
- Effective Date:
- 1 Jul 2011
- Brazil (YA01)
- Effective Date:
- 1 Sep 2000
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Columbia (YC01)
- Effective Date:
- 1 Jul 2015
- Israel (YD01)
- Effective Date:
- 1 Aug 2016
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Jul 1997
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5905-00-695-9547
- Part Number
- Manufacturer
- Status
- AN3155-25-100
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-DTL-6749
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MIL-R-6749
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-00-695-9547
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 260.0 Minimum And 310.0 Maximum
- Electrical Resistance Per Section [CQCC]
- 100.0 Ohms Single Section
- Actuator Travel Control Feature [CRSX]
- Stops
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 25.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 70.0 Single Section
- Body Diameter [ABPM]
- 1.875 Inches Maximum
- Body Length [ADAQ]
- 1.250 Inches Maximum
- Body Style [AAQL]
- Cylindrical Bushing Mounted
- Features Provided [CBBL]
- Humidity Proof
- Cubic Measure [CBME]
- 3.450 Cubic Inches
- Maximum Running Torque [AEFL]
- 40.00 Inch-Ounces
- Maximum Starting Torque [AEFK]
- 40.00 Inch-Ounces
- Maximum Stop Torque [AEFM]
- 240.00 Inch-Ounces
- Mounting Bushing Length [ADAP]
- 0.328 Inches Minimum And 0.422 Inches Maximum
- Mounting Method [AXGY]
- Standard Bushing
- Nonturn Device Location [AEFN]
- At 12 Oclock
- Nonturn Device Radius [AEFP]
- 0.453 Inches Minimum And 0.547 Inches Maximum
- Fragility Factor [AFJN]
- Moderately Rugged
- Power Dissipation Rating Per Section In Watts [CRGD]
- 25.0 Free Air Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -5.0 To 15.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 260.0 Minimum And 310.0 Maximum
- Screw Thread Diameter [AJYN]
- 0.328 Inches Minimum And 0.422 Inches Maximum
- Screw Thread Quantity Per Inch [AJYQ]
- 32.0
- Screw Thread Series Designator [AJYP]
- Unef
- Section Quantity [AAPN]
- 1
- Shaft Bearing Type [AEDZ]
- Sleeve
- Shaft Diameter [ABWV]
- 0.248 Inches Minimum And 0.251 Inches Maximum
- Shaft Style [AEDX]
- Round
- Shaft Length [ABXF]
- 0.391 Inches Minimum And 0.485 Inches Maximum
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-6749 Government Specification
- Terminal Location [APXH]
- Rear End
- Terminal Type And Quantity [TTQY]
- 2 Tab W/Screw
- Test Data Document [TEST]
- 81349-Mil-R-6749 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5905-00-695-9547
DLA Procurement Analysis 5905-00-695-9547
- Last Stock Position:
- 15 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5905-00-695-9547
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5905-00-695-9547
Freight Information 5905-00-695-9547
5905-00-695-9547 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-695-9547 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-695-9547 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-00-695-9547 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-00-695-9547 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-695-9547
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- --
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5905-00-695-9547 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: