Premium Information is available for this item - Upgrade for $1 a day
5905-00-642-1170
Nonprecision Wire Wound Variable Resistor
5905006421170 006421170 CM8739
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Wire Wound Variable Resistor
January 2023
17
Marketplace 5905-00-642-1170
Request a Quotation from participating marketplace vendors
Related Documents 5905-00-642-1170 1+ Documents (More...)
5905-00-642-1170 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00-642-1170
/fsg-59/fsc-5905/us 5905-00-642-1170 /fsg-59/fsc-5905/us 5905-00-642-1170 RQST NE Updated Every Day
Restrictions 5905-00-642-1170
5905-00-642-1170 is a Nonprecision Wire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5905-00-642-1170
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-642-1170
- Italy (ZR01)
- Effective Date:
- 1 Jul 1997
Approved Sources 5905-00-642-1170
- Part Number
- Manufacturer
- Status
- CM8739
- Manufacturer
- 12697 - Clarostat Sensors And Controls (Active)
- Primary Buy
- Primary Buy
Datasheet 5905-00-642-1170
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 300.0 Nominal
- Electrical Resistance Per Section [CQCC]
- 35.000 Ohms All Sections
- Actuator Travel Control Feature [CRSX]
- Stops
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 40.0 All Sections
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 105.0 All Sections
- Body Diameter [ABPM]
- 1.625 Inches Nominal
- Body Length [ADAQ]
- 2.250 Inches Nominal
- Body Style [AAQL]
- Cylindrical Bushing Mounted
- Contact Arm Electrical Off Position [AEEZ]
- Fully Cw
- Features Provided [CBBL]
- Switch
- First Flat Length [ABNB]
- 0.438 Inches Nominal
- Flat Height [ABNC]
- 0.218 Inches Nominal
- Mounting Bushing Length [ADAP]
- 0.375 Inches Nominal
- Mounting Method [AXGY]
- Standard Bushing
- Nonturn Device Location [AEFN]
- At 12 Oclock
- Nonturn Device Radius [AEFP]
- 0.500 Inches Nominal
- Fragility Factor [AFJN]
- Moderately Rugged
- Overall Diameter [ADAV]
- 2.588 Inches Nominal
- Overall Length [ABHP]
- 3.125 Inches Nominal
- Power Dissipation Rating Per Section In Watts [CRGD]
- 25.0 Free Air All Sections
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0 To 10.0 All Sections
- Rotary Actuator Travel In Angular Deg [CQCK]
- 300.0 Nominal
- Screw Thread Diameter [AJYN]
- 0.375 Inches Nominal
- Screw Thread Quantity Per Inch [AJYQ]
- 32.0
- Screw Thread Series Designator [AJYP]
- Unef
- Section Quantity [AAPN]
- 2
- Shaft Diameter [ABWV]
- 0.250 Inches Nominal
- Shaft Style [AEDX]
- Round, Flatted
- Shaft Length [ABXF]
- 0.875 Inches Nominal
- Switch Contact Arrangement [AEGJ]
- Single Pole, Single Throw, Normally Open, Both Positions Maintained
- Switch Current Type And Rating In Amps [CSDK]
- 5.000 Ac/Dc
- Switch Operating Position [AEGH]
- Start Of Rotation
- Switch Type [AEEA]
- Rotary
- Switch Voltage Rating In Volts [AEED]
- 125.0
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius [CRFJ]
- -50.0 To 50.0 All Sections
- Terminal Location [APXH]
- Rear-Bottom
- Terminal Type And Quantity [TTQY]
- 8 Tab, Solder Lug
Similar Supply Items to 5905-00-642-1170
Freight Information 5905-00-642-1170
5905-00-642-1170 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-642-1170 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-642-1170 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5905-00-642-1170 is not classified as a special type of cargo when transported by water. 5905-00-642-1170 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-642-1170
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- No Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-P-130, Laminated and Creped Wrapping Paper
- No Requirement
- Not Applicable
- --
- No special marking
- MIL-P-130, Laminated and Creped Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566 or PPP-B-676, Folding or Setup Box