Premium Information is available for this item - Upgrade for $1 a day
5905-00-607-8608
Film Fixed Resistor
5905006078608 006078608 MIL-PRF-55182/7 RNC50H2431DS MILR55182-7
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors. View more Film Fixed Resistor
January 2023
8
Marketplace 5905-00-607-8608
Request a Quotation from participating marketplace vendors
Related Documents 5905-00-607-8608 5+ Documents (More...)
United States (US) 4. 5905-00-607-8608 Marketplace Restrictions Approved Sources Datasheet Management
Updated Every Day 5905-00-607-8608 RQST Updated Every Day 5905-00-607-8608 RQST NE Related Documents
MIL-R55182/7 RESISTOR,FIXED,FILM 471 EA NS Request Quotation MILR55182/7 RESISTOR,FIXED,FILM 12 EA NS
MIL-R-55182-7 RESISTOR,FIXED,FILM 76 EA NS Request Quotation MILR55182-7 RESISTOR,FIXED,FILM 50 EA NS
MILR55182/7 RESISTOR,FIXED,FILM 12 EA NS Request Quotation MIL-R55182/7 RESISTOR,FIXED,FILM 471 EA NS
MIL-R-55182-7 RESISTOR,FIXED,FILM 76 EA NS Request Quotation MILR55182-7 RESISTOR,FIXED,FILM 50 EA NS
MIL-R55182/7 RESISTOR,FIXED,FILM 471 EA NS Request Quotation MILR55182/7 RESISTOR,FIXED,FILM 12 EA NS
MIL-R-55182-7 RESISTOR,FIXED,FILM 76 EA NS Request Quotation MILR55182-7 RESISTOR,FIXED,FILM 50 EA NS
MIL-R55182/7 RESISTOR,FIXED,FILM 471 EA NS Request Quotation MILR55182/7 RESISTOR,FIXED,FILM 12 EA NS
MILR55182-7 RESISTOR,FIXED,FILM 50 EA NS Request Quotation MIL-R-55182-7 RESISTOR,FIXED,FILM 76 EA NS
Restrictions 5905-00-607-8608
5905-00-607-8608 is a Film Fixed Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-00-607-8608
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-607-8608
- Austria (WB01)
- Effective Date:
- 1 Feb 2005
- Brazil (YA01)
- Effective Date:
- 1 Sep 2000
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5905-00-607-8608
- Part Number
- Manufacturer
- Status
- RNC50H2431DS
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-55182/7
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MILR55182-7
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-00-607-8608
- Characteristic
- Specifications
- FIIG
- Specifications
- A001A0
- Electrical Resistance [AAPP]
- 2.430 Kilohms
- Ambient Temp In Deg Celsius At Full Rated Power [AAQF]
- 125.0
- Ambient Temp In Deg Celsius At Zero Percent Rated Power [AAQG]
- 175.0
- Body Diameter [ABPM]
- 0.065 Inches Nominal
- Body Length [ADAQ]
- 0.150 Inches Nominal
- Inclosure Method [AAQZ]
- Encapsulated
- Power Dissipation Rating In Watts [AEFB]
- 0.050 Free Air
- Reliability Failure Rate Level In Percent [AARH]
- 0.001
- Reliability Indicator [AARG]
- Established
- Resistance Tolerance In Percent [AAPQ]
- -0.500/+0.500
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-55182/7 Government Specification
- Style Designator [STYL]
- Axial Terminal Each End
- Temp Coefficient Of Resistance In Ppm Per Deg Celsius [AAPE]
- -50.0/+50.0
- Temp Range Of Temp Coefficient In Deg Celsius [AAQH]
- -55.0/+175.0
- Terminal Length [ABJT]
- 1.250 Inches Nominal
- Terminal Type [AARB]
- Wire Lead
- Test Data Document [TEST]
- 81349-Mil-R-55182 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Similar Supply Items to 5905-00-607-8608
Freight Information 5905-00-607-8608
5905-00-607-8608 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-607-8608 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-607-8608 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-00-607-8608 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-00-607-8608 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-607-8608
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- --
- ESD sensitive electronic device requirements of MIL-STD-129 apply
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box