Premium Information is available for this item - Upgrade for $1 a day
5905-00-422-0208
Precision Wire Wound Variable Resistor
5905004220208 004220208 2100-2693 534-89-2-5KOHMS 6800-2-5KOHMS 3540S-441-252 7286-76-0 2100-1458
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION. View more Precision Wire Wound Variable Resistor
May 2023
10
Marketplace 5905-00-422-0208
Request a Quotation from participating marketplace vendors
Related Documents 5905-00-422-0208 1+ Documents (More...)
Restrictions 5905-00-422-0208
5905-00-422-0208 is a Precision Wire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item contains gold. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-00-422-0208
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-422-0208
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- GTHD
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5905-00-422-0208
- Part Number
- Manufacturer
- Status
- 2100-2693
- Manufacturer
- 7ZXR5 - Keysight Technologies Inc (Active)
- Primary Buy
- Primary Buy
- 2100-2693
- 1LQK8 - Keysight Technologies, Inc. (Replaced)
- Original Design
- Original Design
- 534-89-2-5KOHMS
- 02111 - Vishay Sprague Inc (Active)
- Secondary Buy
- Secondary Buy
- 6800-2-5KOHMS
- 84048 - Vernitron Corp Vrn International Div (Active)
- Secondary Buy
- Secondary Buy
- 3540S-441-252
- 3Z867 - Bourns, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 7286-76-0
- 73138 - Bi Technologies Corporation (Active)
- Secondary Buy
- Secondary Buy
- 3540S-441-252
- 32997 - Bourns Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 2100-1458
- 28480 - Hewlett-Packard Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 2100-2693
- 28480 - Hewlett-Packard Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-00-422-0208
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 3600.0 Nominal
- Electrical Resistance Per Section [CQCC]
- 2.5 Kilohms Single Section
- Actuator Travel Control Feature [CRSX]
- Stops
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 40.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 125.0 Single Section
- Body Diameter [ABPM]
- 0.875 Inches Nominal
- Body Length [ADAQ]
- 0.750 Inches Nominal
- Body Style [AAQL]
- Cylindrical Bushing Mounted
- Function Characteristic Per Section [CSBX]
- Single Section Linear
- Function Conformity Per Section [CRGM]
- Single Section Independent Linearity
- Function Conformity Tolerance Per Section [CQFL]
- -0.25/+0.25 Single Section
- Maximum Running Torque [AEFL]
- 0.50 Inch-Ounces
- Maximum Starting Torque [AEFK]
- 0.50 Inch-Ounces
- Mounting Bushing Length [ADAP]
- 0.313 Inches Nominal
- Mounting Method [AXGY]
- Standard Bushing
- Lateral Runout [AEGA]
- 0.005 Inches
- Power Dissipation Rating Per Section In Watts [CRGD]
- 2.0 Free Air Single Section
- Precious Material [PRMT]
- Gold
- Precious Material And Location [PMLC]
- Terminals Gold
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -5.0/+5.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 3600.0 Nominal
- Screw Thread Diameter [AJYN]
- 0.375 Inches Nominal
- Screw Thread Quantity Per Inch [AJYQ]
- 32.0
- Screw Thread Series Designator [AJYP]
- Unef
- Section Quantity [AAPN]
- 1
- Shaft Bearing Type [AEDZ]
- Bearing
- Shaft End Play [AEFY]
- 0.010 Inches
- Shaft Diameter [ABWV]
- 0.250 Inches Nominal
- Shaft Radial Play [AEGC]
- 0.003 Inches
- Shaft Runout [AEFZ]
- 0.003 Inches
- Shaft Length [ABXF]
- 0.813 Inches Nominal
- Shaft Style [AEDX]
- Round, Slotted
- Pilot Diameter Runout [AEGB]
- 0.003 Inches
- Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius [CSCY]
- -20.0/+20.0 Single Section
- Terminal Location [APXH]
- Radially Positioned Over Less Than Half The Circumference
- Terminal Type And Quantity [TTQY]
- 3 Tab, Solder Lug
DLA Procurement Analysis 5905-00-422-0208
Management Data 5905-00-422-0208
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5905-00-422-0208
Freight Information 5905-00-422-0208
5905-00-422-0208 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-422-0208 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-422-0208 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-00-422-0208 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-00-422-0208 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-422-0208
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-P-130, Laminated and Creped Wrapping Paper
- No Requirement
- Not Applicable
- --
- No special marking
- MIL-P-130, Laminated and Creped Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566 or PPP-B-676, Folding or Setup Box
Contracting Technical Data File (CTDF) 5905-00-422-0208 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: