Premium Information is available for this item - Upgrade for $1 a day
5905-00-274-3789
Nonprecision Wire Wound Variable Resistor
5905002743789 002743789 MIL-PRF-39015/2 M39015/2-002WM MILR39015-2
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Wire Wound Variable Resistor
May 2023
21
Marketplace 5905-00-274-3789
Request a Quotation from participating marketplace vendors
Related Documents 5905-00-274-3789 5+ Documents (More...)
(Identification) 1/2 NSN 5905-00-274-3789 (Identification) 2/2 - - 1.
15 Minutes 5905-00-274-3789 BUY NE FedMall Updated Every Day 5905-00-274-3789 RQST NE Updated Every
Nonprecision Wire Wound Variable Resistor M39015/2-002WM MILR39015-2 A resistor in which a sliding
RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION 39 EA NS Request Quotation Subscribe to View MILR39015-2
Wound Variable Resistor 4689Nonprecision Wire Wound Variable Resistor5905014914689 014914689 MIL-PRF-39015/2
M39015/2-008XM 7010026-9 576R671H22 3250WK22-203 MILR39015-2 A resistor in which a sliding or
MILR39015-2 RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION 1 EA NS Request Quotation Updated Every Day 5905
Nonprecision Wire Wound Variable Resistor M39015/2-002WM MILR39015-2 A resistor in which a sliding
MIL-PRF-39015/2 RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION 39 EA NS Request Quotation Subscribe to View
MILR39015-2 RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION 1 EA NS Request Quotation Updated Every Day 5905
Restrictions 5905-00-274-3789
5905-00-274-3789 is a Nonprecision Wire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-00-274-3789
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-274-3789
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
Approved Sources 5905-00-274-3789
- Part Number
- Manufacturer
- Status
- M39015/2-002WM
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-39015/2
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MILR39015-2
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-00-274-3789
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Electrical Resistance Per Section [CQCC]
- 200.000 Ohms Single Section
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 85.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 150.0 Single Section
- Body Height [ADAU]
- 0.500 Inches Nominal
- Body Length [ADAQ]
- 0.515 Inches Nominal
- Body Width [ADAT]
- 0.205 Inches Nominal
- Body Style [AAQL]
- Rectangular W/Mounting Holes
- Center To Center Distance Between Center Terminal And Outside Terminal [CQCM]
- 0.100 Inches Nominal
- Center To Center Distance Between Terminals [AEHT]
- 0.200 Inches Nominal
- Mounting Facility Quantity [AKPV]
- 2
- Mounting Hole Diameter [ABTB]
- 0.073 Inches Nominal
- Mounting Method [AXGY]
- Terminal And Unthreaded Hole
- Overall Length [ABHP]
- 0.732 Inches Nominal
- Overall Width [ABMK]
- 0.205 Inches Nominal
- Overall Height [ABKW]
- 0.500 Inches Nominal
- Lateral Distance Between Mounting Hole Centers [AGTP]
- 0.520 Inches Nominal
- Power Dissipation Rating Per Section In Watts [CRGD]
- 0.8 Free Air Single Section
- Reliability Failure Rate Level In Percent [AARH]
- 1.000
- Reliability Indicator [AARG]
- Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -5.0 To 5.0 Single Section
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.078 Inches Nominal
- Shaft Length [ABXF]
- 0.045 Inches Maximum
- Shaft Style [AEDX]
- Round, Slotted
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius [CRFJ]
- -50.0 To 50.0 Single Section
- Terminal Length [ABJT]
- 0.172 Inches Minimum
- Terminal Location [APXH]
- Rear End
- Terminal Type And Quantity [TTQY]
- 3 Pin
- Test Data Document [TEST]
- 81349-Milr39015/2 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5905-00-274-3789
DLA Procurement Analysis 5905-00-274-3789
Management Data 5905-00-274-3789
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5905-00-274-3789
Freight Information 5905-00-274-3789
5905-00-274-3789 has freight characteristics managed by Germany.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-274-3789 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. 5905-00-274-3789 is rated as class 77.5 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-274-3789 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-00-274-3789 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-00-274-3789 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-274-3789
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- Special requirements
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5905-00-274-3789 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: