Premium Information is available for this item - Upgrade for $1 a day
5905-00-255-2482
Nonprecision Wire Wound Variable Resistor
5905002552482 002552482 MIL-PRF-22/3 RP101SD3R0KK M22/03-00031SD MILR22-3 2001-4002
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Wire Wound Variable Resistor
May 2023
19
Marketplace 5905-00-255-2482
Request a Quotation from participating marketplace vendors
Related Documents 5905-00-255-2482 5+ Documents (More...)
M22/03-00061SK MILR22-3 RP101SK8R0KK A resistor in which a sliding or rolling contact moves over
MILR22-3 RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION 1 EA NS Request Quotation Subscribe to View Vendor
M22/03-00061SK MILR22-3 RP101SK8R0KK A resistor in which a sliding or rolling contact moves over
A resistor in which a sliding or rolling contact moves over M22/03-00061SK MILR22-3 RP101SK8R0KK A
M22/03-00061SK MILR22-3 RP101SK8R0KK A resistor in which a sliding or rolling contact moves over
A resistor in which a sliding or rolling contact moves over MILR22-3 RESISTOR,VARIABLE,WIRE WOUND,
M22/03-00061SK MILR22-3 RP101SK8R0KK A resistor in which a sliding or rolling contact moves over
A resistor in which a sliding or rolling contact moves over M22/03-00061SK MILR22-3 RP101SK8R0KK A
Restrictions 5905-00-255-2482
5905-00-255-2482 is a Nonprecision Wire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-00-255-2482
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-255-2482
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- France (ZF01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Jul 1997
Approved Sources 5905-00-255-2482
- Part Number
- Manufacturer
- Status
- M22/03-00031SD
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-22/3
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- RP101SD3R0KK
- 81349 - Military Specifications (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MILR22-3
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 2001-4002
- 92568 - Sheller-Globe Engineered Polymers Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-00-255-2482
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Electrical Resistance Per Section [CQCC]
- 3.0 Ohms Single Section
- Actuator Travel Control Feature [CRSX]
- Stops
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 25.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 340.0 Single Section
- Body Diameter [ABPM]
- 1.680 Inches Nominal
- Body Length [ADAQ]
- 1.410 Inches Nominal
- Body Style [AAQL]
- Cylindrical Bushing Mounted
- Maximum Starting Torque [AEFK]
- 40.00 Inch-Ounces
- Maximum Stop Torque [AEFM]
- 240.00 Inch-Ounces
- Mounting Bushing Length [ADAP]
- 0.328 Inches Minimum And 0.422 Inches Maximum
- Mounting Method [AXGY]
- Standard Bushing
- Nonturn Device Location [AEFN]
- At 12 Oclock
- Nonturn Device Radius [AEFP]
- 0.485 Inches Minimum And 0.515 Inches Maximum
- Overall Length [ABHP]
- 2.332 Inches Nominal
- Overall Diameter [ADAV]
- 2.260 Inches Nominal
- Power Dissipation Rating Per Section In Watts [CRGD]
- 25.0 Heat Sink Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0 To 10.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 275.0 Minimum And 305.0 Maximum
- Screw Thread Diameter [AJYN]
- 0.375 Inches Nominal
- Screw Thread Quantity Per Inch [AJYQ]
- 32.0
- Screw Thread Series Designator [AJYP]
- Unef
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.248 Inches Minimum And 0.251 Inches Maximum
- Shaft Style [AEDX]
- Round, Slotted
- Shaft Length [ABXF]
- 0.828 Inches Minimum And 0.922 Inches Maximum
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-22/3 Government Specification
- Terminal Location [APXH]
- Radially Positioned Over Less Than Half The Circumference
- Terminal Type And Quantity [TTQY]
- 3 Tab, Solder Lug
- Test Data Document [TEST]
- 81349-Mil-R-22 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 5905-00-255-2482
Management Data 5905-00-255-2482
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5905-00-255-2482
Freight Information 5905-00-255-2482
5905-00-255-2482 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-255-2482 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-255-2482 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-00-255-2482 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-00-255-2482 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-255-2482
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566 or PPP-B-676, Folding or Setup Box
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 5905-00-255-2482 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: