Premium Information is available for this item - Upgrade for $1 a day
5905-00-168-9318
Nonprecision Wire Wound Variable Resistor
5905001689318 001689318 128SCAV620-7 55-50-186 APC11-8-112 APC1 1-8-112
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Wire Wound Variable Resistor
May 2023
6
Marketplace 5905-00-168-9318
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5905-00-168-9318 1+ Documents (More...)
(Identification) 1/2 NSN 5905-00-168-9318 (Identification) 2/2 - - 1.
BUY NE FedMall Updated Every Day 5905-00-168-9318 RQST NE Updated Every Day 5905-00-168-9318 RQST Updated
Restrictions 5905-00-168-9318
5905-00-168-9318 is a Nonprecision Wire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5905-00-168-9318
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-168-9318
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- GTKE
Approved Sources 5905-00-168-9318
- Part Number
- Manufacturer
- Status
- 128SCAV620-7
- Manufacturer
- 26512 - Northrop Grumman Systems Corporation (Active)
- Source Control
- Source Control
- 55-50-186
- 18065 - Samarius Precision Instruments, Inc. (Active)
- Primary Buy
- Primary Buy
- APC11-8-112
- 94603 - Honeywell Sensing & Control (Active)
- Primary Buy
- Primary Buy
- APC1 1-8-112
- 94603 - Honeywell Sensing & Control (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- APC1 1-8-112
- 06880 - Data Instruments Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-00-168-9318
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 320.0 Nominal
- Electrical Resistance Per Section [CQCC]
- 5.000 Kilohms 1St Section
- Electrical Resistance Per Section [CQCC]
- 500.000 Ohms 2Nd Section
- Actuator Travel Control Feature [CRSX]
- Stops
- Actuator Type [AEFD]
- Dual Concentric
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 60.0 All Sections
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 125.0 All Sections
- Body Diameter [ABPM]
- 1.219 Inches Maximum
- Body Length [ADAQ]
- 2.313 Inches Maximum
- Body Style [AAQL]
- Cylindrical Bushing Mounted
- Features Provided [CBBL]
- Switch
- Function Characteristic Per Section [CSBX]
- All Sections Linear
- Function Conformity Per Section [CRGM]
- All Sections Independent Linearity
- Function Conformity Tolerance Per Section [CQFL]
- -3.00 To 3.00 All Sections
- Maximum Running Torque [AEFL]
- 2.00 Inch-Ounces
- Maximum Starting Torque [AEFK]
- 2.00 Inch-Ounces
- Maximum Stop Torque [AEFM]
- 128.00 Inch-Ounces
- Mounting Bushing Length [ADAP]
- 0.250 Inches Nominal
- Mounting Method [AXGY]
- Standard Bushing
- Nonturn Device Location [AEFN]
- At 12 Oclock
- Nonturn Device Radius [AEFP]
- 0.359 Inches Nominal
- Fragility Factor [AFJN]
- Rugged
- Overall Diameter [ADAV]
- 1.094 Inches Maximum
- Overall Length [ABHP]
- 3.813 Inches Maximum
- Power Dissipation Rating Per Section In Watts [CRGD]
- 2.0 Free Air 2Nd Section
- Power Dissipation Rating Per Section In Watts [CRGD]
- 4.0 Free Air 1St Section
- Resistance Tolerance Per Section In Percent [CRSS]
- -5.0 To 5.0 All Sections
- Rotary Actuator Travel In Angular Deg [CQCK]
- 320.0 Nominal
- Screw Thread Diameter [AJYN]
- 0.375 Inches Nominal
- Screw Thread Quantity Per Inch [AJYQ]
- 32.0
- Screw Thread Series Designator [AJYP]
- Unef
- Section Quantity [AAPN]
- 2
- Shaft Bearing Type [AEDZ]
- Bearing
- Shaft Diameter [ABWV]
- 0.250 Inches Maximum
- Shaft Style [AEDX]
- Round, Stepped
- Shaft Length [ABXF]
- 1.500 Inches Nominal
- Undercut Diameter [AEDQ]
- 0.125 Inches Maximum
- Undercut Length [AGQL]
- 0.500 Inches Nominal
- Switch Contact Arrangement [AEGJ]
- Single Pole, Single Throw, Normally Open, Both Positions Maintained
- Switch Current Type And Rating In Amps [CSDK]
- 2.000 Ac
- Switch Operating Position [AEGH]
- Start Of Rotation
- Switch Type [AEEA]
- Rotary
- Switch Voltage Rating In Volts [AEED]
- 125.0
- Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius [CSCY]
- -20.0 To 20.0 All Sections
- Terminal Location [APXH]
- Rear-Bottom
- Terminal Type And Quantity [TTQY]
- 8 Turret
DLA Procurement Analysis 5905-00-168-9318
Management Data 5905-00-168-9318
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- RA
- Attack Aircraft (A6E)
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 5905-00-168-9318
Freight Information 5905-00-168-9318
5905-00-168-9318 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-168-9318 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. 5905-00-168-9318 is rated as class 77.5 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-168-9318 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 5905-00-168-9318 is not classified as a special type of cargo when transported by water. 5905-00-168-9318 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-168-9318
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-DTL-17667, Neutral Wrapping Paper
- No Requirement
- Not Applicable
- --
- Special requirements
- MIL-DTL-17667, Neutral Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5905-00-168-9318 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: