Premium Information is available for this item - Upgrade for $1 a day
5905-00-132-4365
Nonprecision Nonwire Wound Variable Resistor
5905001324365 001324365 MIL-PRF-22097/3 4171788-233 380-3755-070 RJ22CL203 RJ22BL203 MILR22097-3
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Nonprecision Nonwire Wound Variable Resistor
August 2023
36


Marketplace 5905-00-132-4365
Request a Quotation from participating marketplace vendors
Related Documents 5905-00-132-4365 5+ Documents (More...)
-3 A resistor in which a sliding ,MIL-PRF-22097/3 G121-070-032 RJ22BL104 MILR22097-3 A resistor in https
an exposed area of the MILR22097 -3 A resistor 869022- -1793 5905009131793 009131793,MIL-PRF- 22097/
MILR22097-3 5905007655414007655414,MILR22097-3 5905002286564002286564,MIL-PRF-22097 ,MIL-PRF-22097/3
https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00-132-4365 5905001324365 001324365,MIL-PRF-22097/
an exposed area of the MILR22097 -3 A resistor 869022- -1793 5905009131793 009131793,MIL-PRF-
22097/3 5905-00-913-1793 5905009131793 009131793,MIL-PRF-22097/3 ,MIL-PRF-22097/3 RJ22CL201 MILR22097
5905007655414 007655414,MILR22097-3 /fsg-59/fsc-5905/us 5905-00-228-65645905002286564002286564,MIL-PRF
5905004618965 004618965,MIL-PRF-22097/3 418126-71 RJ22CW504 MILR22097-3 A resistor in which a
132-4365 5905001324365 001324365,MIL-PRF-22097/3 -43655905001324365001324365,MIL-PRF-22097/3 in which
,MIL-PRF-22097/3 /fsg-59/fsc-5905/us 5905 ,MIL-PRF-22097/3 G121-070-032 RJ22BL104 MILR22097-3 A resistor
Restrictions 5905-00-132-4365
5905-00-132-4365 is a Nonprecision Nonwire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-00-132-4365
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-132-4365
- US Army (A918)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A196
- Supplementary Receivers:
- BD
- US Air Force (FXGX)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXTX
- US Marine Corps (MC49)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- MC13
- US Navy (N9BN)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- HDKE
- Poland (WP01)
- Effective Date:
- 1 Oct 2004
- Spain (YB01)
- Effective Date:
- 1 Sep 2008
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Mar 2008
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 5905-00-132-4365
- Part Number
- Manufacturer
- Status
- RJ22CL203
- Manufacturer
- 81349 - Military Specifications (Active)
- Definitive Standard
- Definitive Standard
- MIL-PRF-22097/3
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- MILR22097-3
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4171788-233
- 05869 - Raytheon Company (Active)
- Advisory Reference
- Advisory Reference
- 380-3755-070
- 13499 - Rockwell Collins, Inc. (Active)
- Advisory Reference
- Advisory Reference
- RJ22BL203
- 81349 - Military Specifications (Active)
- Transferred
- Transferred
Datasheet 5905-00-132-4365
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Electrical Resistance Per Section [CQCC]
- 20.0 Kilohms Single Section
- Actuator Travel Control Feature [CRSX]
- Stops
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 85.0 Single Section
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 150.0 Single Section
- Body Height [ADAU]
- 0.490 Inches Minimum And 0.510 Inches Maximum
- Body Length [ADAQ]
- 0.490 Inches Minimum And 0.510 Inches Maximum
- Body Width [ADAT]
- 0.182 Inches Minimum And 0.197 Inches Maximum
- Body Style [AAQL]
- Rectangular W/Mounting Holes
- Features Provided [CBBL]
- Nonmetallic Shaft
- Maximum Starting Torque [AEFK]
- 5.00 Inch-Ounces
- Mounting Hole Diameter [ABTB]
- 0.090 Inches Nominal
- Mounting Method [AXGY]
- Terminal
- Lateral Distance Between Mounting Hole Centers [AGTP]
- 0.513 Inches Minimum And 0.526 Inches Maximum
- Power Dissipation Rating Per Section In Watts [CRGD]
- 0.5 Free Air Single Section
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -10.0/+10.0 Single Section
- Rotary Actuator Travel In Angular Deg [CQCK]
- 7200.0 Minimum And 16200.0 Maximum
- Section Quantity [AAPN]
- 1
- Shaft Diameter [ABWV]
- 0.058 Inches Minimum And 0.098 Inches Maximum
- Shaft Length [ABXF]
- 0.025 Inches Minimum And 0.045 Inches Maximum
- Shaft Style [AEDX]
- Round, Slotted
- Overall Height [ABKW]
- 0.490 Inches Minimum And 0.510 Inches Maximum
- Overall Length [ABHP]
- 0.525 Inches Minimum And 0.545 Inches Maximum
- Overall Width [ABMK]
- 0.182 Inches Minimum And 0.197 Inches Maximum
- Specification/Standard Data [ZZZK]
- 81349-Mil-R-22097/3 Government Specification
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius [CRFJ]
- -250.0/+250.0 Single Section
- Terminal Location [APXH]
- Rear End
- Terminal Type And Quantity [TTQY]
- 3 Wire Lead
- Test Data Document [TEST]
- 81349-Mil-R-22097 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 5905-00-132-4365
DLA Procurement Analysis 5905-00-132-4365
Management Data 5905-00-132-4365
Army
- Materiel Category and Inventory Manager:
- Q
- Electronics Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Material Identification:
- B
- Consumable Repair Parts
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5905-00-132-4365
Freight Information 5905-00-132-4365
5905-00-132-4365 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-132-4365 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-132-4365 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-00-132-4365 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-00-132-4365 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-132-4365
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-P-130, Laminated and Creped Wrapping Paper
- No Requirement
- Not Applicable
- --
- Special requirements
- MIL-P-130, Laminated and Creped Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5905-00-132-4365 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: