Premium Information is available for this item - Upgrade for $1 a day
5905-00-104-9406
Precision Nonwire Wound Variable Resistor
5905001049406 001049406 805360-1 804543-1 804543-1-1
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. View more Precision Nonwire Wound Variable Resistor
August 2023
12
Marketplace 5905-00-104-9406
Request a Quotation from participating marketplace vendors
Related Documents 5905-00-104-9406 5+ Documents (More...)
RESISTOR,VARIABLE,NONWIRE WOUND,PRECISION 1 EA NS Request Quotation 804543-1-1 RESISTOR,VARIABLE,NONWIRE
contact moves over an exposed RESISTOR,VARIABLE,NONWIRE WOUND,PRECISION 1 EA NS Request Quotation 804543-1
Upgrade your Account Upgrade 5915-00-119-1601Band Pass Filter5915001191601 001191601 ERXF6100 26-805360-1
day Upgrade your Account Upgrade 5315-01-424-1802Headed Grooved Pin5315014241802 014241802 SM-C-805360-1
Variable Resistor Upgrade 5905-00-104-9406Precision Nonwire Wound Variable Resistor5905001049406 001049406
805360-1 804543 -1 804543-1-1 A resistor in which a sliding or rolling contact moves over an exposed
5315014241802014241802 day Upgrade your Account Upgrade 5315-01-424-1802Headed Grooved Pin5315014241802 014241802SM-C-805360-1
0 AMSC 0 IMC Z IMCACTY PA Approved Sources 5315 https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00-104-9406
www.nsnlookup.com /fsg-59/fsc-5915/us 5915-00-119 https//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-00-104-9406
Precision Nonwire Wound Variable Resistor Assembly5998011480158 011480158 805360-1 Upgrade your
Restrictions 5905-00-104-9406
5905-00-104-9406 is a Precision Nonwire Wound Variable Resistor that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown. This item is sensitive to Electrostatic Discharge.
Import and Export 5905-00-104-9406
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5905-00-104-9406
- US Air Force (FXGX)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXTX
- Supplementary Collaborators:
- SX
- US Navy (N9BN)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9ND
- Supplementary Collaborators:
- KE
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Mar 2008
Approved Sources 5905-00-104-9406
- Part Number
- Manufacturer
- Status
- 805360-1
- Manufacturer
- 64547 - Honeywell International, Inc (Active)
- Primary Buy
- Primary Buy
- 804543-1
- 70210 - Honeywell International Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 804543-1-1
- 64547 - Honeywell International, Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 805360-1
- 70210 - Honeywell International Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 804543-1-1
- 70210 - Honeywell International Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5905-00-104-9406
- Characteristic
- Specifications
- FIIG
- Specifications
- A002A0
- Effective Electrical Rotation In Deg Angular Rotation [AEFH]
- 343.368 Nominal
- Electrical Resistance Per Section [CQCC]
- 2.9 Kilohms 2Nd Section
- Electrical Resistance Per Section [CQCC]
- 2.5 Kilohms 1St Section
- Actuator Travel Control Feature [CRSX]
- Stops
- Actuator Type [AEFD]
- Single Shaft
- Ambient Temp In Deg Celsius Per Section At Full Rated Power [CSDH]
- 70.0 All Sections
- Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power [CQGN]
- 125.0 All Sections
- Body Diameter [ABPM]
- 1.445 Inches Maximum
- Body Length [ADAQ]
- 1.880 Inches Maximum
- Body Style [AAQL]
- Cylindrical Servo Mounted
- Features Provided [CBBL]
- Switch
- Function Characteristic Per Section [CSBX]
- All Sections Linear
- Function Conformity Per Section [CRGM]
- All Sections Absolute Conformity
- Function Conformity Tolerance Per Section [CQFL]
- -0.0007 To 0.0007 2Nd Section
- Function Conformity Tolerance Per Section [CQFL]
- -0.0003 To 0.0003 1St Section
- Maximum Running Torque [AEFL]
- 2.60 Inch-Ounces
- Maximum Starting Torque [AEFK]
- 2.60 Inch-Ounces
- Maximum Stop Torque [AEFM]
- 20.00 Inch-Ounces
- Mechanical Backlash In Deg Angular Rotation [AEGD]
- 0.1
- Mounting Lip Depth [AEDA]
- 0.0570 Inches Minimum And 0.0670 Inches Maximum
- Mounting Lip Diameter [AECZ]
- 1.4320 Inches Minimum And 1.4420 Inches Maximum
- Mounting Method [AXGY]
- Clamp Ring
- Overall Diameter [ADAV]
- 1.880 Inches Maximum
- Overall Length [ABHP]
- 2.450 Inches Maximum
- Lateral Runout [AEGA]
- 0.002 Inches
- Power Dissipation Rating Per Section In Watts [CRGD]
- 1.5 Free Air All Sections
- Reliability Indicator [AARG]
- Not Established
- Resistance Tolerance Per Section In Percent [CRSS]
- -2.0 To 2.0 All Sections
- Rotary Actuator Travel In Angular Deg [CQCK]
- 349.368 Nominal
- Section Quantity [AAPN]
- 2
- Shaft Bearing Type [AEDZ]
- Ball
- Shaft Diameter [ABWV]
- 0.1869 Inches Minimum And 0.1872 Inches Maximum
- Shaft End Play [AEFY]
- 0.005 Inches
- Shaft Runout [AEFZ]
- 0.002 Inches
- Shaft Style [AEDX]
- Round
- Shaft Length [ABXF]
- 0.550 Inches Minimum And 0.570 Inches Maximum
- Pilot Diameter Runout [AEGB]
- 0.001 Inches
- Pilot Diameter [AAVL]
- 0.9995 Inches Minimum And 1.0000 Inches Maximum
- Pilot Length [AAVM]
- 0.0570 Inches Minimum And 0.0670 Inches Maximum
- Undercut Diameter [ABPA]
- 1.310 Inches Maximum
- Undercut Width [ABPC]
- 0.0570 Inches Minimum
- Switch Contact Arrangement [AEGJ]
- Single Pole, Single Throw, Normally Open, Both Positions Maintained
- Switch Current Type And Rating In Amps [CSDK]
- 0.003 Dc
- Switch Operating Position [AEGH]
- Any Position Of Rotation Travel
- Switch Type [AEEA]
- Rotary
- Switch Voltage Rating In Volts [AEED]
- 30.0
- Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius [CRFJ]
- -400.0 To 400.0 All Sections
- Terminal Location [APXH]
- Radially Positioned Over Less Than Half The Circumference
- Terminal Type And Quantity [TTQY]
- 8 Turret
- Test Data Document [TEST]
- 70210-805360 Drawing (This Is The Basic Governing Drawing, Such As A Contractor Drawing, Original Equipment Manufacturer Drawing, Etc.; Excludes Any Specification, Standard Or Other Document That May Be Referenced In A Basic Governing Drawing)
Weapon Systems (WSDC) 5905-00-104-9406
DLA Procurement Analysis 5905-00-104-9406
Management Data 5905-00-104-9406
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- EH
- ELECTRONIC COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5905-00-104-9406
Freight Information 5905-00-104-9406
5905-00-104-9406 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062960. A Sub NMFC of X. It has a NMFC Description of REOSTATS/PARTS NOI. 5905-00-104-9406 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 35140 which rates the freight between FCL and LCL. 5905-00-104-9406 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 5905-00-104-9406 is classified as an Electrostatic Sensitive Device (ESD) when transported by water. 5905-00-104-9406 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5905-00-104-9406
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- 0.25 lb or less, one dimension 2" or less, other dimensions less than 24"
- 85 to 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 5905-00-104-9406 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: