5905-14-260-8235

260-8235 2510012608235 012608235 SLEEVE,SWING ARM https//www.nsnlookup.com /fsg-59/fsc-5905/fr 5905-14-260-8235
Potentiometre Fonct 5905142608235 142608235 5905-14-260-8235 5905142608235 142608235 POTENTIOMETRE

1 1 Jan 1974 5915-14-265-7383 Band Pass Filter 121762NRNCC: 5 | RNVC: 9 | DAC: 2 1 Jan 1970 5905-14-260-8235

1670-99-131-5923 1670991315923 991315923 STUD PLATE

1670-99-225-8260 1670992258260 992258260 BLOCK

5365-99-665-8719 5365996658719 996658719 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.