5905-14-216-6051

2040-99-852-5201 2040998525201 998525201 HINGE ASSEMBLY,WATE

7510-15-185-4698 7510151854698 151854698 CARTUCCIA COLORE CO

-14-230-3518 Inductive Wire Wound Fixed Resistor 011422RNCC: 5 | RNVC: 9 | DAC: 6 1 Jan 1967 5905-14-216-6051

4730-12-342-9745 4730123429745 123429745 is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. it is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. for square, rectangular, or irregularly shaped items, see clamp, hose, special-shaped. excludes clamp, electrical; clamp, loop; clamp, fire hose, shutoff; ferrule (as modified); and hand screw.

3120-99-742-6594 3120997426594 997426594 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.