5905-12-301-3975

9641 Wire Wound Fixed Resistor 9006 34,88KOHM+/-0,02%TK5RNCC: 3 | RNVC: 2 | DAC: 3 9 Mar 1990 5905-12-301-3975
Wire Wound Fixed Resistor 9010/MG433 10OHM+/-0,1%RNCC: 3 | RNVC: 2 | DAC: 3 11 Oct 1984 5905-12

6625-14-316-4790 6625143164790 143164790 is an instrument which measures electric current and is calibrated and marked in amperes or any multiple and/or submultiple thereof. the value may be expressed by means of a pointer and calibrated dial or a digital readout display. for current detecting type of devices, see galvanometer.

6130-01-316-4790 6130013164790 013164790 is a component which converts available alternating current or direct current electrical power into a form required to operate another component or set. the item may consist of a combination of an invertor, vibrator; vibrator, interrupter; vibrator, self-rectifying; invertor, power, static; with a transformer and rectifier(s) employing electron tubes, semiconductor diode or metallic (dry disc) type components, or the synchronized secondary contact(s) of a vibrator, self-rectifying; or may consist of electron tubes, semiconductor diode or metallic (dry disc) type rectifiers and capacitors in transformerless (alternating current-direct current type) circuits which may be of the voltage-multiplier type. the item may incorporate a filter, direct current power and provisions for regulation of input and/or output voltage. the item may have special input, output, control or other facilities for applications in specialized environments such as medical, dental or other operations. excludes battery chargers and rotating machinery types of items, such as motor generators and dynamotors.

5365-12-316-4790 5365123164790 123164790 is a tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. it is designed to maintain a predetermined distance between assembled parts. the item may be with or without flange(s) of any peripheral shape. the overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (when the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). for items having other than a round or hexagon peripheral shape, see spacer, plate. excludes items with lubricating features, see bearing, sleeve and bushing, sleeve. see also bushing, tapered; spacer, ring; washer, flat; and washer, (as modified).