5895-01-517-5150

3120-25-118-0797 3120251180797 251180797 is a tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. the overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. for items made of rubber, see bushing, nonmetallic. see also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. excludes bushing, drill, jig.

2011 5895-01-595-1603 Electrical Synchronizer 265348-23RNCC: 3 | RNVC: 2 | DAC: 6 25 Apr 2011 5895-01-517-5150

5999-00-937-9354 5999009379354 009379354 MOUNTING PAD,ELECTRICAL-ELECTRONIC COMPO

5999-01-184-7423 5999011847423 011847423 MOUNTING PAD,ELECTRICAL-ELECTRONIC COMPO

5999-01-028-1168 5999010281168 010281168 is an item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. it isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. it includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. it may also afford protection from shock or vibration. it may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. for items whose function is electrical insulation only, see insulator, (as modified). excludes holder, (as modified); retainer, (as modified), and spacer, plate.