5895-99-622-5042

202-5577 Part NumberManufacturerStatus191-2140/01 https//www.nsnlookup.com /fsg-58/fsc-5895/uk 5895-99-622-5042
Electrical Frequency Discriminator 996225042 5895-99-622-5042 5895996225042 996225042 is an item

202-5577 Part NumberManufacturerStatus191-2140/01 https//www.nsnlookup.com /fsg-58/fsc-5895/uk 5895-99-622-5042
Electrical Frequency Discriminator 996225042 5895-99-622-5042 5895996225042 996225042 is an item

5950-99-970-8905 5950999708905 999708905 is an item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. it may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. it is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. it may include tuning devices, integral resistors and capacitors; however, excludes filter (as modified). the coil has only two electrical terminals. for items having tapped winding or more than one winding - see transformer, radio frequency. for coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see suppressor, parasitic.

25 Apr 1991 5955-99-933-2635 Quartz Crystal Unit XLD21CRNCC: 3 | RNVC: 2 | DAC: 2 25 Aug 1978 5895-99-622-5042

5365-01-138-5915 5365011385915 011385915 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.