5895-14-348-7078

Documents 5985-00-318-7110 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-58/fsc-5895/fr 5895-14-348-7078
us 5985-00-318-7110 59850031871100031871105985-00-318-71105985003187110003187110 Restrictions 5895-14-348-7078

6505-99-318-7110 6505993187110 993187110 SODIUM CHLORIDE INJECTION

5999-01-318-7110 5999013187110 013187110 CONTACT ASSEMBLY,ELECTRICAL

7530-14-318-7110 7530143187110 143187110 FICH EVAC PRESOMPT

5365-12-318-7110 5365123187110 123187110 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.