5840-12-385-3660

4420-00-360-2138 4420003602138 003602138

4730-14-360-2138 4730143602138 143602138 is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. it is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. for square, rectangular, or irregularly shaped items, see clamp, hose, special-shaped. excludes clamp, electrical; clamp, loop; clamp, fire hose, shutoff; ferrule (as modified); and hand screw.

6640-01-360-2138 6640013602138 013602138 STRING,CARBON COATING

5310-01-513-1340 5310015131340 015131340 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

1989 6605-12-338-7295 Gyro Compass 133-452.NG005/RAL6014RNCC: 3 | RNVC: 2 | DAC: 5 21 Aug 1995 5840-12-385-3660