5836-14-473-5938

5330-15-007-9190 5330150079190 150079190 is a circular shaped item with an aperture manufactured to predetermined dimensions and designed for use as a seal in stuffing boxes, packing nuts, and the like. it may be (1) any nonmetallic molded or formed ring (except solid (without joint) rings having a square or rectangular cross section); or (2) any shredded metal or metal foil type metallic or semimetallic rings. excludes felt items but includes multimaterial items in which one of the materials is felt. for solid (without joints) nonmetallic items with a square or rectangular cross section, see washer (as modified) and gasket. for rubber items specifically designed for weather-proofing doors, windows, chests, and the like see seal, nonmetallic angle; seal, nonmetallic channel; and seal, nonmetallic, special shaped section. for circular (with aperature) nonmetallic items with a solid round cross-section see o-ring. excludes cup, compression; gasket; washer (as modified); and felt, mechanical, preformed.

7195-01-007-9190 7195010079190 010079190

6150-33-210-3732 6150332103732 332103732 is an item consisting of two definite lengths of insulated electrical cable having each end terminated with a clip (1), electrical. the cables and/or clips are color coded for identification. the item provides for the quick temporary transfer of electrical energy for restarting a disabled vehicle engine. the conductors may be twisted or molded together (except at the ends) or entirely separated. excludes items having branches or forks. excludes lead, test; cable assembly, special purpose, electrical and lead, electrical.

5310-21-007-9190 5310210079190 210079190 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

1290-27-007-9190 1290270079190 270079190 is a collection of two or more cable assemblies, which include a junction box; used for the transmission of electrical power and/or data from related fire control equipment to the gun battery. it may include one or more of the following: azimuth and elevation transmitters, azimuth and elevation indicators, data contact rings, telephone contact rings, and the like. excludes cable assembly set, electrical; and cable assembly, special purpose, electrical branched.