5835-12-179-0739

5835-66-153-9757 Recorder-Reproducer Control FDS 170-101RNCC: 3 | RNVC: 2 | DAC: A 9 Jan 2006 5835-12-179-0739

5305-00-505-3213 5305005053213 005053213 is a screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.

5960-15-089-6076 5960150896076 150896076 is an inclosure, including two or more electrodes, in which a flow of electrons may occur through a vacuum or a contained gas. the electronic conduction takes place either by means of electrons emitted from a cathode or by ionization of the contained gas. includes phototubes (photoemissive type only), geiger-mueller tubes, traveling wave tubes, cathode ray tubes and microwave tubes (klystron, magnetron, or the like). excludes items whose primary purpose is to produce light energy. also excludes photoelectric cell; and semiconductor device (as modified).

3120-01-339-2115 3120013392115 013392115 is a tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. the overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. for items made of rubber, see bushing, nonmetallic. see also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. excludes bushing, drill, jig.

5340-12-181-7780 5340121817780 121817780 BUMPER,NONMETALLIC