5825-12-146-9070

8030-01-675-8103 8030016758103 016758103 is a chemical composition formulated for coating or for filling voids, cracks, joints or seams of objects and/or materials to exclude foreign matter and/or prevent the transmission of fluids therethrough. it is not designed to act as a primer coating or to be sanded or ground after application. it cannot be wiped off. for items which are specifically compounded to provide electrical insulating characteristics, use insulating compound, electrical. excludes caulking compound; gasket cement; corrosion preventive compound; cement, iron and steel; plumbing fixture setting compound; preservative coating, rubber and textile treating compounds.

3 9 Jul 1997 5825-12-142-4539 Tuning Drive 57424 20164RNCC: 5 | RNVC: 9 | DAC: 9 30 May 1969 5825-12-146-9070

4730-99-960-1543 4730999601543 999601543 is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. the cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. this firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.

JavaScript in your web browser . 3110-99-432-5254Bearing Roller3110994325254 994325254 6-5MM0D9MMLGR0LLER 251B2
NumberManufacturerStatus6-5MM0D9MMLGR0LLER U0214 - Skf (Uk) Ltd (Active) Primary Buy RNCC 3 RNVC 2 DAC 2 251B2

4730-99-432-5318 4730994325318 994325318 is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. the cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. this firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.