5820-01-699-3538

3040-12-701-3525 3040127013525 127013525 is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. see also arm (as modified); and lever (as modified).

5950-00-701-3525 5950007013525 007013525

699-3562 Radio Equipment Modification Kit 11388-0240-01RNCC: 1 | RNVC: 2 | DAC: D 25 Jan 2022 5820-01-699-3538

5310-99-701-3525 5310997013525 997013525 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

7014229-03RNCC: 1 | RNVC: 2 | DAC: D7014229RNCC: D | RNVC: 9 | MEDALS: Y | DAC: D 24 Feb 2022 5820-01-699-3538