Documents 6645-99-333-7657 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-58/fsc-5820/us 5820-01-092-1414
Multiplexer 5820010921414 010921414,MTD-24 5820-01-092-1414 5820010921414 010921414 is an item
5330-99-544-3112 5330995443112 995443112 is a deformable material which prevents the passage of matter through the joint formed when two faces are joined. it may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. it may be made to any predetermined dimension and shape. excludes flat disks, items made of felt material and items having joints. for round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.
5310-99-562-1661 5310995621661 995621661 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5310-99-560-1144 5310995601144 995601144 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
5310-99-558-6877 5310995586877 995586877 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.