5815-25-122-8672

1967 5815-15-089-6739 Teletypewriter Reperforator T2BPNRNCC: 3 | RNVC: 2 | DAC: 1 31 Dec 1975 5815-25-122-8672

5315-12-151-5749 5315121515749 121515749 is a headless, generally cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). it has an outside diameter equal to or less than its length. its length must not exceed twelve inches (304 mm); for items whose length exceeds twelve inches (304 mm); see rod,straight,headless. it is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. see also pin,straight,threaded.

5365-12-151-1840 5365121511840 121511840 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

5365-12-150-3467 5365121503467 121503467 is a tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. it is designed to maintain a predetermined distance between assembled parts. the item may be with or without flange(s) of any peripheral shape. the overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (when the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). for items having other than a round or hexagon peripheral shape, see spacer, plate. excludes items with lubricating features, see bearing, sleeve and bushing, sleeve. see also bushing, tapered; spacer, ring; washer, flat; and washer, (as modified).

5365-12-150-3482 5365121503482 121503482 is a tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. it is designed to maintain a predetermined distance between assembled parts. the item may be with or without flange(s) of any peripheral shape. the overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (when the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). for items having other than a round or hexagon peripheral shape, see spacer, plate. excludes items with lubricating features, see bearing, sleeve and bushing, sleeve. see also bushing, tapered; spacer, ring; washer, flat; and washer, (as modified).