5805-14-213-8125

5805-14-532-7380 Telephone Terminal Group 2100971JRNCC: 3 | RNVC: 2 | DAC: 4 6 Dec 2002 5805-14-275-1024
1972 5805-14-215-2668 Telephone Terminal Group 9105174RNCC: 3 | RNVC: 2 | DAC: 4 1 Jan 1965 5805-14-213-8125

2895-14-243-7610 2895142437610 142437610 SELECTEUR DE CIRCUI

5340-25-119-8864 5340251198864 251198864 is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). it is designed to retain and/or position the items close to a structure. it may be fastened to the structure on one end, both ends, or in the center. see also clamp, loop. excludes bracket, pipe; strap, leather and strap, webbing.

5305-14-412-6374 5305144126374 144126374 is a screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.

5305-14-412-6376 5305144126376 144126376 is a screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.