5640-00-054-7050

enable JavaScript in your web browser . 5355-14-407-2405Knob5355144072405 144072405 0624 016 429159 624-16
for $1 a day Upgrade your Account Upgrade 5320-01-318-2027Blind Rivet5320013182027 013182027 BN566-624-16
AMC 1 AMSC C IMC Z IMCACTY KE Approved Sources 5320-01-318-2027 Part NumberManufacturerStatusBN566-624-16

5305-01-407-1385 5305014071385 014071385 is an externally threaded fastener whose threaded portion is of one nominal diameter. the head has an internal socket or multiple spline for use with an inserted driver. a locking feature may be incorporated in the design of the head or threads. excludes items with bevel (conical) heads. see bolt, internal wrenching. excludes screw, shoulder; and screw, machine.

4730-21-849-0892 4730218490892 218490892 is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. one end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. the other end connection is designed to grip the hose directly, either externally, internally, or both. it includes items designed to accommodate a swivel flange.

5306-00-754-1759 5306007541759 007541759 is a high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.

5305-21-857-9719 5305218579719 218579719 is an externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. a locking feature may be incorporated in the design of the head or threads.