5365-01-661-1160

011104901 a day Upgrade your Account Upgrade 5365-01-110-4901Sleeve Spacer5365011104901 011104901 NAS1057
ST3M679S3 ST3M679S3 SPACER,SLEEVE 72 EA NS Request Quotation NAS1057 SPACER,SLEEVE 80 EA NS Request
Sleeve Spacer 5365016611160 016611160 SPACER,SLEEVE 80 EA NS Request Quotation NAS1057W3-010 SPACER

Upgrade for $1 a day Upgrade your Account Upgrade 5365-01-661-1161Sleeve Spacer5365016611161 016611161 NAS1057
day Upgrade your Account Upgrade 5365-01-463-2762Sleeve Spacer5365014632762 014632762 NAS1057W3-010 NAS1057
NAS1057 SPACER,SLEEVE 80 EA NS Request Quotation NAS1057W3-010 SPACER,SLEEVE 63 EA NS Request Quotation

5365-01-497-3973 5365014973973 014973973 is a tubular shaped item with a round or hexagon peripheral shape having two flat bearing surfaces perpendicular to the axis of the centrally located hole. it is designed to maintain a predetermined distance between assembled parts. the item may be with or without flange(s) of any peripheral shape. the overall length must exceed 25 percent of the outside diameter or distance across peripheral flats of the body. (when the length, outside diameter, and/or distance across peripheral flats are designed as a tolerance, the maximum dimension will be used to determine compliance). for items having other than a round or hexagon peripheral shape, see spacer, plate. excludes items with lubricating features, see bearing, sleeve and bushing, sleeve. see also bushing, tapered; spacer, ring; washer, flat; and washer, (as modified).

day Upgrade your Account Upgrade 5365-01-463-2762Sleeve Spacer5365014632762 014632762 NAS1057W3-010 NAS1057
NAS1057 SPACER,SLEEVE 80 EA NS Request Quotation NAS1057W3-010 SPACER,SLEEVE 63 EA NS Request Quotation
ST3M679S3 SPACER,SLEEVE 72 EA NS Request Quotation NAS1057 SPACER,SLEEVE 80 EA NS Request Quotation

5310-01-038-1125 5310010381125 010381125 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.