Premium Information is available for this item - Upgrade for $1 a day
5365-01-618-5409
Ring Spacer
5365016185409 016185409 431400 431400-D
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE. View more Ring Spacer
November 2023
1
Marketplace 5365-01-618-5409
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-618-5409 5+ Documents (More...)
RQST NE Updated Every Day 5365-01-618-5409 RQST Updated Every Day 5365-01-618-5409 RQST NE Related Documents
5365-01-618-5409 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-618-5409
5315-99-546-9531 Headless Straight Pin 5315995469531995469531 T365241TEMET36524ET36524-8741TEME929-431400
Ring Spacer 5365016185409 016185409,431400 -7183 Part NumberManufacturerStatusF1321-431400 https
Slovakia (WS) Czech Republic (WZ) Approved Sources 1025-16-000-7098 Part NumberManufacturerStatusUH1-431400
1356-25-128-7579 Norway (ZT) Approved Sources 1356-25-128-7579 Part NumberManufacturerStatusF1321-431400
to enable JavaScript in your web browser . 1356-25-128-7579Sprengroer1356251287579 251287579 F1321-431400
Maintenance and Supply Agency (ZX) Approved Sources 1356-22-274-7183 Part NumberManufacturerStatusF1321-431400
Restrictions 5365-01-618-5409
5365-01-618-5409 is a Ring Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5365-01-618-5409
- US Army (A919)
- Effective Date:
- 1 Apr 2013
- Supplementary Receivers:
- AZ
Approved Sources 5365-01-618-5409
- Part Number
- Manufacturer
- Status
- 431400
- Manufacturer
- 5PFF0 - Hydrema U.S., Inc. (Active)
- Primary Buy
- Primary Buy
- 431400-D
- 5PFF0 - Hydrema U.S., Inc. (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5365-01-618-5409
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Material [MATT]
- Steel
- Outside Diameter [ABHE]
- 35.000 Inches Nominal
- Inside Diameter [AARX]
- 31.000 Inches Nominal
- Overall Thickness [ADUM]
- 7.800 Inches Minimum And 8.200 Inches Maximum
- Special Features [FEAT]
- Drawing States Coating Hydrema Instr 305.42
DLA Procurement Analysis 5365-01-618-5409
Management Data 5365-01-618-5409
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5365-01-618-5409
Freight Information 5365-01-618-5409
5365-01-618-5409 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 5365-01-618-5409 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 5365-01-618-5409 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 596 for ocean manifesting and military sealift. 5365-01-618-5409 is not classified as a special type of cargo when transported by water. 5365-01-618-5409 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5365-01-618-5409 1 Records
Contracting Technical Data File (CTDF) 5365-01-618-5409 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: