Premium Information is available for this item - Upgrade for $1 a day
5365-01-577-2051
Shim
5365015772051 015772051 3829112
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
November 2023
4
Marketplace 5365-01-577-2051
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-577-2051 5+ Documents (More...)
/fsg-59/fsc-5977/us
Restrictions 5365-01-577-2051
5365-01-577-2051 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5365-01-577-2051
- US Army (A919)
- Effective Date:
- 1 Aug 2009
- Supplementary Receivers:
- AZ
- US Air Force (FGGI)
- Effective Date:
- 1 Aug 2009
- US Marine Corps (MC47)
- Effective Date:
- 1 Aug 2009
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2009
- Supplementary Collaborators:
- HD
Approved Sources 5365-01-577-2051
- Part Number
- Manufacturer
- Status
- 3829112
- Manufacturer
- 75Q65 - Oshkosh Defense Llc (Active)
- Primary Buy
- Primary Buy
- 3829112
- 45152 - Oshkosh Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5365-01-577-2051
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Material [MATT]
- Steel
- Material Document And Classification [MDCL]
- Astm A1011 Assn Std All Material Responses
- Construction [CQCF]
- One-Piece
- Overall Thickness [ADUM]
- 0.060 Inches Nominal
- Style Designator [STYL]
- Rectangular
- Overall Length [ABHP]
- 1.970 Inches Nominal
- Overall Width [ABMK]
- 1.570 Inches Nominal
- Special Features [FEAT]
- Drwg Under International Traffic In Arms Export Control
- End Item Identification [AGAV]
- M-Atv
- Part Name Assigned By Controlling Agency [CXCY]
- Shim,Lower Door Support
Weapon Systems (WSDC) 5365-01-577-2051
DLA Procurement Analysis 5365-01-577-2051
- Last Stock Position:
- 9890 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5365-01-577-2051
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Defense Logistics Agency (DS)
- PG
- Subscribe
- 1
- PG
- Oct 2021
- Department of the Air Force (DF)
- PG
- Subscribe
- 1
- PG
- Oct 2020
- Department of the Air Force (DF)
- PG
- Subscribe
- 1
- PG
- Jan 2020
- Department of the Army (DA)
- PG
- Subscribe
- 1
- PG
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Army (DA)
- A
- K
- U/I Contains 10 Ea
- 00000000010EA
- K
- Department of the Air Force (DF)
- F
- K
- U/I Contains 10 Ea
- 00000000010EA
- K
- US Marine Corps (DM)
- M
- K
- U/I Contains 10 Ea
- 00000000010EA
- K
- Department of the Navy (DN)
- N
- K
- U/I Contains 10 Ea
- 00000000010EA
- K
- Defense Logistics Agency (DS)
- I
- K
- U/I Contains 10 Ea
- 00000000010EA
- K
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5365-01-577-2051
Freight Information 5365-01-577-2051
5365-01-577-2051 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 106940. A Sub NMFC of X. It has a NMFC Description of SPACERS/SEPARATORS I/S NOI TUBULAR. 5365-01-577-2051 is rated as class 55 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50675 which rates the freight between FCL and LCL. 5365-01-577-2051 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-577-2051 is not classified as a special type of cargo when transported by water. 5365-01-577-2051 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-577-2051
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- A-A-203, Kraft Wrapping Paper
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- A-A-203, Kraft Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5365-01-577-2051 6 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE7L314V5186
- 14 Apr 2014
- Subscribe
- 9210
- Subscribe
- Subscribe
- Subscribe
- SPE7L314M0901
- 03 Jan 2014
- Subscribe
- 1430
- Subscribe
- Subscribe
- Subscribe
- SPE7L314V0499
- 13 Nov 2013
- Subscribe
- 1888
- Subscribe
- Subscribe
- Subscribe
- SPE7L314V0210
- 05 Nov 2013
- Subscribe
- 280
- Subscribe
- Subscribe
- Subscribe
- SPM7L313V3176
- 02 Aug 2013
- Subscribe
- 694
- Subscribe
- Subscribe
- Subscribe
- SPM7L313M6221
- 31 Jul 2013
- Subscribe
- 219
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5365-01-577-2051 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: