Premium Information is available for this item - Upgrade for $1 a day
5365-01-563-9426
Plate Spacer
5365015639426 015639426 L4600-20007
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
November 2023
2
Marketplace 5365-01-563-9426
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-563-9426 1+ Documents (More...)
United States (US) 4. 5365-01-563-9426 Marketplace Restrictions Approved Sources Datasheet Management
RQST NE Updated Every Day 5365-01-563-9426 RQST Updated Every Day 5365-01-563-9426 RQST NE Related Documents
Restrictions 5365-01-563-9426
5365-01-563-9426 is a Plate Spacer Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Approved Sources 5365-01-563-9426
- Part Number
- Manufacturer
- Status
- L4600-20007
- Manufacturer
- 1LQK8 - Keysight Technologies, Inc. (Replaced)
- Primary Buy
- Primary Buy
Management Data 5365-01-563-9426
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Jan 2009
- Department of the Army (DA)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Army (DA)
- A
- V
- Discontinued W/O Replacement
- V
- Department of the Army (DA)
- I
- V
- Discontinued W/O Replacement
- V
Army
- Materiel Category and Inventory Manager:
- L
- Missiles, Missile Materiel
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 3
- Insurance Items
This code will identify items for which there may be occasional intermittent demands not sufficiently repetitive to warrant classification as regular stock items, but for which prudence requires that nominal quantity be stocked for the reason that the essentiality of the item and the long lead time required to obtain such items by purchase would create an unacceptable situation if no stock were carried.
- Weapons System / End Item / Homogeneous Group:
- TD
- Other Electronics Equipment
Test Equipment Electrical
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.