Premium Information is available for this item - Upgrade for $1 a day
5365-01-515-9746
Serrated Lock Ring
5365015159746 015159746 RLRR1997E104
A locking device which is serrated on the inside and outside diameters. It may have outer serrations omitted on one or two sides for close edge installation. The inner serrations engage the mating serrations of bolts, inserts, nuts, studs or similar items to be locked in place. The outer serrations broach their way into parent material when driven or pressed into place. View more Serrated Lock Ring
January 2023
2
Marketplace 5365-01-515-9746
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-515-9746 1+ Documents (More...)
Restrictions 5365-01-515-9746
5365-01-515-9746 is a Serrated Lock Ring that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5365-01-515-9746
- Spain (YB01)
- Effective Date:
- 1 Dec 2003
Approved Sources 5365-01-515-9746
- Part Number
- Manufacturer
- Status
- RLRR1997E104
- Manufacturer
- 83324 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 5365-01-515-9746
- Characteristic
- Specifications
- FIIG
- Specifications
- T252-E
- End Item Identification [AGAV]
- Gearbox Housing On Ct7-4 Turbopr Op Engine
- Material [MATT]
- Steel Corrosion Resisting
- Outer Serration Quantity [AWPM]
- 12
- Inner Serration Quantity [AWPN]
- 20
- Inside Diameter [AARX]
- 0.320 Inches Minimum And 0.327 Inches Maximum
- Side Outer Serrations Omitted For Close Edge Installation [AWQC]
- Two Sides
- Overall Height [ABKW]
- 0.133 Inches Minimum And 0.148 Inches Maximum
- Overall Outside Diameter [ADGA]
- 0.474 Inches Minimum And 0.483 Inches Maximum
- Pilot Diameter [AAVL]
- 0.423 Inches Minimum And 0.438 Inches Maximum
- Surface Treatment [SFTT]
- Passivate
NATO Stock Numbers Related to 5365-01-515-9746
Freight Information 5365-01-515-9746
5365-01-515-9746 has freight characteristics.. 5365-01-515-9746 has a variance between NMFC and UFC when transported by rail and the description should be consulted.