Premium Information is available for this item - Upgrade for $1 a day
5365-01-471-2454
Plate Spacer
5365014712454 014712454 3329223-7 3329223
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT. View more Plate Spacer
May 2023
2
Marketplace 5365-01-471-2454
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-471-2454 5+ Documents (More...)
United States (US) 4. 5365-01-471-2454 Marketplace Restrictions Approved Sources Datasheet Management
5365-01-471-2454 RQST Updated Every Day 5365-01-471-2454 RQST NE Related Documents 5365-01-471-2454
www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-471-0915 Double Angle Bracket 5340014710915014710915 3329223
Plate Spacer 5365014712454 014712454 www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-471-2454 https
-5 3329223 A metallic or nonmetallic item of various peripheral shapes and a solid cross-section.
Plate Spacer 5365014712454 014712454 Upgrade for $1 a day Upgrade your Account Upgrade 5365-01-
Documents ( More... ) https//www.nsnlookup.com /fsg https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-471-2454
Plate Spacer 5365014712454 014712454 5365-01-471-2454 2+ Documents ( More... ) https/ https//www.nsnlookup.com
Plate Spacer 5365014712454 014712454 2454 Plate Spacer 5365014712454014712454 Upgrade https//www.nsnlookup.com
a day Upgrade your Account Upgrade 4820-01-139-3953Valve Seat4820011393953 011393953012-500-0002 3329223
Restrictions 5365-01-471-2454
5365-01-471-2454 is a Plate Spacer that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-471-2454
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-471-2454
- US Air Force (FGGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FGCX
- Poland (WP01)
- Effective Date:
- 1 Jul 2011
Approved Sources 5365-01-471-2454
- Part Number
- Manufacturer
- Status
- 3329223-7
- Manufacturer
- 98897 - Lockheed Martin Corp (Active)
- Primary Buy
- Primary Buy
- 3329223
- 98897 - Lockheed Martin Corp (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5365-01-471-2454
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- End Item Identification [AGAV]
- C-130 Acft
- Bolt Hole Quantity [AECS]
- 2
- Bolt Hole Centerline To Nearest Edge Distance [ADVJ]
- 0.470 Inches Minimum And 0.530 Inches Maximum
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 1.120 Inches Minimum And 1.180 Inches Maximum
- Hole Diameter [AAUB]
- 0.200 Inches Minimum And 0.205 Inches Maximum
- Material [MATT]
- Aluminum Alloy 2024
- Outside Edge To Bolt Hole Center Distance Along Length [ADVE]
- 0.370 Inches Minimum And 0.430 Inches Maximum
- Overall Length [ABHP]
- 1.940 Inches Minimum And 1.960 Inches Maximum
- Overall Thickness [ADUM]
- 0.470 Inches Minimum And 0.530 Inches Maximum
- Overall Width [ABMK]
- 0.970 Inches Minimum And 1.030 Inches Maximum
- Style Designator [STYL]
- Non-Circular W/Square Corners
DLA Procurement Analysis 5365-01-471-2454
Management Data 5365-01-471-2454
Similar Supply Items to 5365-01-471-2454
Freight Information 5365-01-471-2454
5365-01-471-2454 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 115620. A Sub NMFC of X. It has a NMFC Description of BUSHINGS NOI I/S. 5365-01-471-2454 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 59240 which rates the freight between FCL and LCL. 5365-01-471-2454 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-471-2454 is not classified as a special type of cargo when transported by water. 5365-01-471-2454 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-471-2454
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5365-01-471-2454 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: