Premium Information is available for this item - Upgrade for $1 a day
5365-01-454-6511
Shim
5365014546511 014546511 751-6402201 FIND 73 211033301 751-64022022 ITEM 73 751-6402273 ITEM 1
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim
May 2023
1
Marketplace 5365-01-454-6511
Request a Quotation from participating marketplace vendors
Related Documents 5365-01-454-6511 3+ Documents (More...)
BUY NE FedMall Updated Every Day 5365-01-454-6511 RQST NE Updated Every Day 5365-01-454-6511 RQST
Updated Every Day 5365-01-454-6511 RQST NE Related Documents 5365-01-454-6511 3+ Documents ( More...
-3301 8455-21-103-3446 https//www.nsnlookup.com https//www.nsnlookup.com /fsg-53/fsc-5365/us 5365-01-454-6511
Shim 5365014546511 014546511 day Upgrade your Account Upgrade 5365-01-454-6511Shim5365014546511
Shim 5365014546511 014546511 Account Upgrade 5365-01-454-6511Shim5365014546511 https//www.nsnlookup.com
Restrictions 5365-01-454-6511
5365-01-454-6511 is a Shim that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5365-01-454-6511
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5365-01-454-6511
- US Navy (N9BG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 5365-01-454-6511
- Part Number
- Manufacturer
- Status
- 211033301
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- 751-64022022 ITEM 73
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 751-6402273 ITEM 1
- 53711 - Naval Sea Systems Command (Active)
- Secondary Buy
- Secondary Buy
- 751-6402201 FIND 73
- 53711 - Naval Sea Systems Command (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5365-01-454-6511
- Characteristic
- Specifications
- FIIG
- Specifications
- A07000
- Material [MATT]
- Copper Alloy 260
- Material Document And Classification [MDCL]
- Qq-B-613 Fed Spec Single Material Response
- Construction [CQCF]
- Laminated
- Lamination Quantity [BRDX]
- 63
- Lamination Thickness [BRDY]
- 0.002 Inches Nominal
- Overall Thickness [ADUM]
- 0.125 Inches Nominal
- Style Designator [STYL]
- Non-Circular W/O Bolt Holes
- Overall Length [ABHP]
- 1.600 Inches Nominal
- Overall Width [ABMK]
- 0.975 Inches Nominal
- Aperture Diameter [ABVL]
- 0.406 Inches Nominal
- Features Provided [CBBL]
- Separable
- Special Features [FEAT]
- Aperture Is Not Centrally Located; Nominal Distance From Aperture Centerline To Nearest Edge Along Length Is 0.600 In.; Nominal Distance From Aperture Centerline To Nearest Edge Along Width Is 0.475 In.; One Corner Is Rounded With Nominal Radius Of 0.250 In.
Weapon Systems (WSDC) 5365-01-454-6511
DLA Procurement Analysis 5365-01-454-6511
Management Data 5365-01-454-6511
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5365-01-454-6511
Freight Information 5365-01-454-6511
5365-01-454-6511 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 115620. A Sub NMFC of X. It has a NMFC Description of BUSHINGS NOI I/S. 5365-01-454-6511 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 59240 which rates the freight between FCL and LCL. 5365-01-454-6511 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5365-01-454-6511 is not classified as a special type of cargo when transported by water. 5365-01-454-6511 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5365-01-454-6511
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5365-01-454-6511 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: